Re: [PATCH] libata: Fix (hopefully) all the remaining problems withdevices failing setup/identify

[Jeff Garzik]

Alan wrote:
> @@ -5142,6 +5174,20 @@
>  	status = ata_chk_status(ap);
>  	if (unlikely(status & ATA_BUSY))
>  		goto idle_irq;
> +		
> +	if (unlikely(qc->tf.command == ATA_CMD_SET_FEATURES && 
> +			qc->tf.feature == SETFEATURES_XFER)) {
> +		/* Let the timings change settle and the drive catch up as
> +		   some hardware needs up to 10uS to get its brain back in
> +		   gear. Taken from the workarounds in drivers/ide done by
> +		   Matthew Faupel/Niccolo Rigacci */
> +		for (i = 0; i < 10; i++) {
> +			if ((status & (ATA_BUSY | ATA_DRQ | ATA_ERR)) == 0)
> +				break;
> +			udelay(1);
> +			status = ata_chk_status(ap);
> +		}


Looks like you should use ata_busy_wait() here, rather than reproducing 
the same code again.

	Jeff


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/