Re: smp and irq conflict

[Robert Hancock]

Lapo TIN wrote:
> I need to capture at 25 frame per second from each channel...
> So 25 x 8 total frames per second on the pci.
>
>
> So do you think I have to change the motherboard ?
> What is important ? the chipset ? is there specification I need ?

What resolution are you using? 720x480 with 24 bits per pixel and 25fps 
will use about 25MB/sec on the PCI bus, there is no way you can keep up 
with 8 channels running on a standard 32-bit 33MHz PCI bus which can 
only transfer 133 MB/sec at most. If you need this much transfer rate, 
you likely need PCI Express or PCI-X capture cards or at least a 
motherboard which has multiple PCI buses (which most desktop boards 
don't typically have).

You may be able to reduce the resolution and/or frame rate in order to 
allow the PCI bus to cope. Also, do you have enough CPU and disk speed 
in order to cope with all these streams?

--
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@xxxxxxxxxxxxx
Home Page: http://www.roberthancock.com/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/