Re: MSI failure on nForce 430 (WAS: intel 82571EB gigabit fails to see link on 2.6.20-rc5 in-tree e1000 driver (regression))

[Adrian Bunk]

On Sat, Jan 20, 2007 at 02:34:37PM -0500, Adam Kropelin wrote:
> (cc: list trimmed and thread moved to linux-pci)
> 
> I have a PCI-E e1000 card that does not see interrupts on 2.6.20-rc5 
> unless CONFIG_PCI_MSI is disabled. An e1000 maintainer indicated that 
> the PHY state is correct, it's just that the interrupt is not getting 
> thru to the kernel. Interestingly, on 2.6.19 PHY interrupts get thru ok 
> with MSI enabled (link status responds appropriately) but packet tx 
> fails with timeout errors, implying that perhaps MAC interrupts are not 
> arriving.
> 
> I've attached the contents dmesg, 'lspci -vvv', and 'cat 
> /proc/interrupts' from 2.6.20-rc5.
> 
> This is an nForce 430 based chipset on a Dell E521 which has had 
> interrupt routing issues before. Prior to 2.6.19 it had to be booted 
> with 'noapic' in order to come up at all. It also had USB lockup 
> problems until I applied the latest BIOS update (v1.1.4). So a BIOS 
> interrupt routing bug with MSI is not out of the question.
> 
> I'm happy to gather more data or run tests...

Was this regression fixed by Eric's patch that is included in -rc7?

> --Adam

cu
Adrian

-- 

       "Is there not promise of rain?" Ling Tan asked suddenly out
        of the darkness. There had been need of rain for many days.
       "Only a promise," Lao Er said.
                                       Pearl S. Buck - Dragon Seed

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/