Re: MSI failure on nForce 430 (WAS: intel 82571EB gigabit fails to see link on 2.6.20-rc5 in-tree e1000 driver (regression))

[Adam Kropelin]

On Fri, Feb 02, 2007 at 09:25:38AM -0800, Auke Kok wrote:
> Adrian Bunk wrote:
> > On Sat, Jan 20, 2007 at 02:34:37PM -0500, Adam Kropelin wrote:
> >> (cc: list trimmed and thread moved to linux-pci)
> >>
> >> I have a PCI-E e1000 card that does not see interrupts on 2.6.20-rc5 
> >> unless CONFIG_PCI_MSI is disabled. An e1000 maintainer indicated that 
> >> the PHY state is correct, it's just that the interrupt is not getting 
> >> thru to the kernel. Interestingly, on 2.6.19 PHY interrupts get thru ok 
> >> with MSI enabled (link status responds appropriately) but packet tx 
> >> fails with timeout errors, implying that perhaps MAC interrupts are not 
> >> arriving.
> >>
> >> I've attached the contents dmesg, 'lspci -vvv', and 'cat 
> >> /proc/interrupts' from 2.6.20-rc5.
> >>
> >> This is an nForce 430 based chipset on a Dell E521 which has had 
> >> interrupt routing issues before. Prior to 2.6.19 it had to be booted 
> >> with 'noapic' in order to come up at all. It also had USB lockup 
> >> problems until I applied the latest BIOS update (v1.1.4). So a BIOS 
> >> interrupt routing bug with MSI is not out of the question.
> >>
> >> I'm happy to gather more data or run tests...
> > 
> > Was this regression fixed by Eric's patch that is included in -rc7?
> 
> no, this is a different issue afaics. Eric's patch solves a msi vector leak 
> where MSI's were no longer recovered after all 256 of them were handed out. The 
> issue here seems to be a very different regression (no vector at all or vector 
> not setup correctly to begin with).
> 
> I do suggest re-testing the issue with 2.6.20rc7, but it's unlikely it fixes the 
> problem for Adam.

Your thought is correct: 2.6.20-rc7 still fails.

--Adam

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/