Re: Nvidia cable detection problems (was [PATCH] amd74xx: don't configure udma mode higher than BIOS did)

[Bartlomiej Zolnierkiewicz]

Hi,

On 2/5/07, Tejun Heo <htejun@xxxxxxxxx> wrote:
> Alan wrote:
> >> The *real* solution is to use the BIOS ACPI _GTM _STM methods for this.
> >> Then you can remove all chipset specific knowledge from the IDE driver.
> >> This is what the MS driver does on Windows, so you know it's received a
> >> lot of testing from NVIDIA and board vendors.

Allen, thanks for quick reply.

Your mail explained the issue pretty well and saved us a lot of time.

> > Well we can certainly do some of that if ACPI is present and active. In
> > particular since _GTM will give us current modes allowing for hotplug and
> > post BIOS boot kexec etc it ought to be safe to do Tejun's hack that way.
> > We could even probe UDMA3+ capable devices by doing _STM to a high mode
> > and _GTM to determine the cable type 8)

agreed

> Glad to see the problem getting solved.  Now that we know the solution,
> any volunteers?  :-)

Well, since you posted the initial patches and have the affected hardware... 8)

Thanks,
Bart
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/