Re: [PATCH 2/3, try #3] Blackfin: serial driver for Blackfinarchitecture against Linux kernel 2.6.20

[Aubrey Li]

On 2/8/07, Russell King <rmk+lkml@xxxxxxxxxxxxxxxx> wrote:
> On Wed, Feb 07, 2007 at 06:49:58PM +0800, Wu, Bryan wrote:
> > Thanks Russell's review, we update the serial core driver according to
> > Russell's comments.  Here is the change log:
> >
> > a) use "ttyBF" as blackfin serial name and use new serial major/minor number
> > b) can accept command line serial setting like "console=ttyBF0,115200", delete the baud rate setting macros
> > c) termios can be changed on the fly
>
> Since you're not implementing the ability to handle INPCK, BRKINT, PARMRK,
> IGNPAR and IGNBRK, please arrange for your driver to reflect the real
> settings in the termios.
>
> In other words:
>
> > +static void
> > +bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
> > +                struct ktermios *old)
> > +{
> > +     struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
> > +     unsigned long flags;
> > +     unsigned int baud, quot;
> > +     unsigned short val, ier, lcr = 0;
> > +
> > +     switch (termios->c_cflag & CSIZE) {
> > +     case CS8:
> > +             lcr = WLS(8);
> > +             break;
> > +     case CS7:
> > +             lcr = WLS(7);
> > +             break;
> > +     case CS6:
> > +             lcr = WLS(6);
> > +             break;
> > +     case CS5:
> > +             lcr = WLS(5);
> > +             break;
> > +     default:
> > +             printk(KERN_ERR "%s: word lengh not supported\n",
> > +                     __FUNCTION__);
> > +     }
> > +
> > +     if (termios->c_cflag & CSTOPB);
> > +             lcr |= STB;
> > +     if (termios->c_cflag & PARENB) {
> > +             lcr |= PEN;
> > +             if (!(termios->c_cflag & PARODD))
> > +                     lcr |= EPS;
> > +     }
>
> Insert here:
>         termios->c_iflag |= INPCK | BRKINT | PARMRK;
>         termios->c_iflag &= ~(IGNPAR | IGNBRK);
>
> This way applications will know that these controls are not implemented
> for this port.

Thanks a lot to point it out. I'll fix this and re-send the patch.

Regards,
-Aubrey
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/