Re: PCI riser cards and PCI irq routing, etc
From: Lennart Sorensen
Date: Mon Feb 19 2007 - 10:17:26 EST
On Mon, Feb 19, 2007 at 05:04:48AM +0100, Udo van den Heuvel wrote:
> lspci and interrupts at the bottom. yes, we have apic.
Well you could always try to just change the setting to see if you find
one where the interrupts are happy. If you change the setting by one at
a time, you should only have to try 4 positions to get one that works
since that is how many interrupts PCI has.
> The EN12000 is equipped with a PCI riser like the one here:
> http://www.tranquilpc-shop.co.uk/acatalog/info%5f2%2ehtml
> Please also see
> http://www.tranquilpc-shop.co.uk/acatalog/PCI_Risers.html and
> http://www.tranquilpc.co.uk/support/Files/TPC014/Tranquil%20Riser.pdf
> for info about how the riser works.
>
> > I guess it is possible the card does something weird and the IRQs for
> > both cards have to actually be the same. If that is the case you could
> > make the kernel change the IRQ assigned to the second card before
> > loading the driver. Or you could do it from the boot loader or
> > something (The system I work with has a stupid bios that doesn't have a
> > clue about bridges, so we added IRQ fixup code to grub to deal with all
> > PCI bridges before booting the system).
>
> Ah, this sounds interesting.
> Any pointers about hwo to do this?
Well reasonably you shouldn't have to.
> I will give the change a try.
>
> The info:
>
> 00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro
> Host Bridge
> 00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro
> Host Bridge
> 00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro
> Host Bridge
> 00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
> 00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro
> Host Bridge
> 00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro
> Host Bridge
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
> 00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
> Controller (rev 80)
> 00:0e.0 Ethernet controller: VIA Technologies, Inc. VT6120/VT6121/VT6122
> Gigabit Ethernet Adapter (rev 11)
> 00:0f.0 IDE interface: VIA Technologies, Inc. VIA VT6420 SATA RAID
> Controller (rev 80)
> 00:0f.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81)
> 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81)
> 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 81)
> 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge
> [KT600/K8T800/K8T890 South]
> 00:11.5 Multimedia audio controller: VIA Technologies, Inc.
> VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
> 00:13.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
> 00:14.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
> 01:00.0 VGA compatible controller: VIA Technologies, Inc. UniChrome Pro
> IGP (rev 01)
You need lspci -v to get interrupt information.
> CPU0
> 0: 15939569 IO-APIC-edge timer
> 1: 36 IO-APIC-edge i8042
> 8: 1 IO-APIC-edge rtc
> 9: 0 IO-APIC-fasteoi acpi
> 12: 222 IO-APIC-edge i8042
> 14: 570999 IO-APIC-edge ide0
> 16: 3166202 IO-APIC-fasteoi saa7146 (0), via@pci:0000:01:00.0
> 17: 2619374 IO-APIC-fasteoi eth0
> 18: 402194 IO-APIC-fasteoi libata
> 19: 0 IO-APIC-fasteoi uhci_hcd:usb1, uhci_hcd:usb2,
> uhci_hcd:usb3, ehci_hcd:usb4
> 20: 2 IO-APIC-fasteoi saa7146 (1), ohci1394
> 21: 2768193 IO-APIC-fasteoi VIA8237
> NMI: 0
> LOC: 15938827
> ERR: 0
> MIS: 0
That unfortunately only shows interrupts in use by active drivers.
--
Len Sorensen
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/