[PATCH 5/5] sata_nv: enable hotplug interrupt and fix some readl/readwmismatches

[Robert Hancock]

We already have code that handles hotplug interrupt indications in ADMA
mode, this turns on the control flag that actually enables these interrupts.
Also fixes some cases in the same functions where a 16-bit register was read
using a readl instead of a readw.

Signed-off-by: Robert Hancock <hancockr@xxxxxxx>

--- linux-2.6.20-git6edit/drivers/ata/sata_nv.c	2007-02-15 22:36:02.000000000 -0600
+++ linux-2.6.20-git6edit/drivers/ata/sata_nv.c.delayandfixes	2007-02-19 17:00:14.000000000 -0600
@@ -1041,14 +1034,15 @@ static int nv_adma_port_start(struct ata

	/* clear GO for register mode, enable interrupt */
	tmp = readw(mmio + NV_ADMA_CTL);
-	writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL);
+	writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
+		 NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);

	tmp = readw(mmio + NV_ADMA_CTL);
	writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-	readl( mmio + NV_ADMA_CTL );	/* flush posted write */
+	readw( mmio + NV_ADMA_CTL );	/* flush posted write */
	udelay(1);
	writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-	readl( mmio + NV_ADMA_CTL );	/* flush posted write */
+	readw( mmio + NV_ADMA_CTL );	/* flush posted write */

	return 0;
}
@@ -1100,14 +1094,15 @@ static int nv_adma_port_resume(struct at

	/* clear GO for register mode, enable interrupt */
	tmp = readw(mmio + NV_ADMA_CTL);
-	writew((tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN, mmio + NV_ADMA_CTL);
+	writew( (tmp & ~NV_ADMA_CTL_GO) | NV_ADMA_CTL_AIEN |
+		 NV_ADMA_CTL_HOTPLUG_IEN, mmio + NV_ADMA_CTL);

	tmp = readw(mmio + NV_ADMA_CTL);
	writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-	readl( mmio + NV_ADMA_CTL );	/* flush posted write */
+	readw( mmio + NV_ADMA_CTL );	/* flush posted write */
	udelay(1);
	writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-	readl( mmio + NV_ADMA_CTL );	/* flush posted write */
+	readw( mmio + NV_ADMA_CTL );	/* flush posted write */

	return 0;
}
@@ -1490,10 +1493,10 @@ static void nv_adma_error_handler(struct
		/* Reset channel */
		tmp = readw(mmio + NV_ADMA_CTL);
		writew(tmp | NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-		readl( mmio + NV_ADMA_CTL );	/* flush posted write */
+		readw( mmio + NV_ADMA_CTL );	/* flush posted write */
		udelay(1);
		writew(tmp & ~NV_ADMA_CTL_CHANNEL_RESET, mmio + NV_ADMA_CTL);
-		readl( mmio + NV_ADMA_CTL );	/* flush posted write */
+		readw( mmio + NV_ADMA_CTL );	/* flush posted write */
	}

	ata_bmdma_drive_eh(ap, ata_std_prereset, ata_std_softreset,

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/