Re: [lm-sensors] Could the k8temp driver be interfering with ACPI?

[Jean Delvare]

On Wed, 21 Feb 2007 11:03:07 -0500, Chuck Ebbert wrote:
> Jean Delvare wrote:
> > Can you try to load the i2c-dev driver, then run the following commands
> > and report the results:
> > $ i2cdetect -l
> > For each bus listed:
> > $ i2cdetect N
> 
> FWIW it's really an ATIIXP chipset, but supposedly PIIX4 compatible:
> 
> # i2cdetect -l
> i2c-0   smbus           SMBus PIIX4 adapter at 8400             Non-I2C SMBus adapter

No i2c_ec. Maybe your distribution is loading it by default for
everyone then.

Either way, it means you can forget right away about sbs, if i2c_ec
didn't register a device, sbs cannot be used.

> # i2cdetect 0
> WARNING! This program can confuse your I2C bus, cause data loss and worse!
> I will probe file /dev/i2c-0.
> I will probe address range 0x03-0x77.
> Continue? [Y/n] y
>      0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
> 00:          XX XX XX XX XX XX XX XX XX XX XX XX XX
> 10: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
> 20: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
> 30: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
> 40: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
> 50: 50 51 XX XX XX XX XX XX XX XX XX XX XX XX XX XX
> 60: XX XX XX XX XX XX XX XX XX 69 XX XX XX XX XX XX
> 70: XX XX XX XX XX XX XX XX

Only a couple EEPROMs and a clock chip on your SMBus, it's very
unlikely that ACPI accesses this at all. So I'd be surprised that
i2c-piix4 is causing any trouble.

This leaves asus_acpi as the only candidate? Better unload _all_ the
drivers you consider as suspects, and see if it changes anything. I
guess not.

-- 
Jean Delvare
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/