Re: 2.6.20 kernel hang with USB drive and vfat doing ftruncate

[OGAWA Hirofumi]

Kumar Gala <galak@xxxxxxxxxxxxxxxxxxx> writes:

>>> I usually run the following twice to get the hang state:
>>>
>>> time ./trunc_test bar 100000000 &
>>> time ./trunc_test baz 100000000 &
>>>
>>> I was wondering if anyone had any suggestions on what to poke at next
>>> to try and figure out what is going on.
>
> So I realized I could use sysrq to provide some more debug  
> information.  When the system locks up I get the following output  
> from 't'
>
> [  497.499249] usb-storage   D 00000000     0   671      5            
> 773   670 (L-TLB)
> [  497.506930] Call Trace:
> [  497.509372] [C3F35A60] [C00083AC] __switch_to+0x28/0x40
> [  497.514608] [C3F35A80] [C01F4B78] schedule+0x324/0x6bc
> [  497.519756] [C3F35AC0] [C01F5D6C] schedule_timeout+0x6c/0xd0
> [  497.525426] [C3F35B00] [C01F5C9C] io_schedule_timeout+0x30/0x54
> [  497.531356] [C3F35B20] [C0050DE4] congestion_wait+0x64/0x8c
> [  497.536941] [C3F35B70] [C004A9F0] throttle_vm_writeout+0x1c/0x84
> [  497.542958] [C3F35B90] [C004F33C] shrink_zone+0xbb0/0xfe4
> [  497.548367] [C3F35D40] [C004F8F4] try_to_free_pages+0x184/0x2cc
> [  497.554298] [C3F35DB0] [C0049AA8] __alloc_pages+0x110/0x2c0
> [  497.559878] [C3F35E00] [C0060F84] cache_alloc_refill+0x394/0x694
> [  497.565900] [C3F35E30] [C00614A0] __kmalloc+0xc4/0xcc
> [  497.570961] [C3F35E40] [C01544D0] usb_alloc_urb+0x1c/0x5c
> [  497.576371] [C3F35E50] [C015520C] usb_sg_init+0x1a0/0x2f8
> [  497.581779] [C3F35EA0] [C0167318] usb_stor_bulk_transfer_sg+0x8c/ 
> 0x138
> [  497.588317] [C3F35ED0] [C0167960] usb_stor_Bulk_transport+0x140/0x310
> [  497.594767] [C3F35F00] [C0167DCC] usb_stor_invoke_transport+0x2c/ 
> 0x344
> [  497.601303] [C3F35F50] [C0166B2C] usb_stor_transparent_scsi_command 
> +0x10/0x20
> [  497.608449] [C3F35F60] [C0168498] usb_stor_control_thread+0x1f8/0x290
> [  497.614900] [C3F35FC0] [C0033E48] kthread+0xf4/0x130
> [  497.619876] [C3F35FF0] [C001093C] kernel_thread+0x44/0x60
> [  497.625285] sh            D 3009C7EC     0   718      1            

[...]

> and from 'm'
>
> [  731.834529] Show Memory
> [  731.836968] Mem-info:
> [  731.839234] DMA per-cpu:
> [  731.841768] CPU    0: Hot: hi:   18, btch:   3 usd:   3   Cold:  
> hi:    6, btch:   1 usd:   2
> [  731.850206] Active:1510 inactive:11309 dirty:7188 writeback:3330  
> unstable:0 free:1009 slab:1671 mapped:110 pagetables:19
> [  731.861075] DMA free:4036kB min:4096kB low:5120kB high:6144kB  
> active:6040kB inactive:45236kB present:65024kB pages_scanned:292  
> all_unreclaimable? no
> [  731.874363] lowmem_reserve[]: 0 0
> [  731.877685] DMA: 1*4kB 0*8kB 0*16kB 0*32kB 1*64kB 1*128kB 1*256kB  
> 1*512kB 1*1024kB 1*2048kB 0*4096kB = 4036kB
> [  731.887669] Free swap:            0kB
> [  731.893913] 16384 pages of RAM
> [  731.896963] 798 reserved pages
> [  731.900011] 10946 pages shared
> [  731.903058] 0 pages swap cached
>
> It seems like usb-storage and aio are completely off in the weeds.   
> Ideas?

It seems usb-storage should remove some kmalloc and use mempool() for
urb...  Is someone working on this? And idea?
-- 
OGAWA Hirofumi <hirofumi@xxxxxxxxxxxxxxxxxx>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/