Re: [PATCH] libata: add NCQ blacklist entries from Silicon Image Windows driver

[Jens Axboe]

On Thu, Feb 22 2007, Mark Lord wrote:
> Jens Axboe wrote:
> >>Robert Hancock wrote:
> >..
> >>>+    /* The following blacklist entries are taken from the Windows
> >>>+       driver .inf files for the Silicon Image 3124 and 3132. */
> >>>+    { "Maxtor 7B250S0",    "BANC1B70",    ATA_HORKAGE_NONCQ, },
> >>>+    { "HTS541060G9SA00",    "MB3OC60D",    ATA_HORKAGE_NONCQ, },
> >>>+    { "HTS541080G9SA00",    "MB4OC60D",    ATA_HORKAGE_NONCQ, },
> >>>+    { "HTS541010G9SA00",    "MBZOC60D",    ATA_HORKAGE_NONCQ, },
> >>Do we have information that these drives fail on non-SiI controllers?
> >>
> >>Sometimes the problem can be related to a single family of controllers.
> >
> >I don't know about the Hitachi's, but the Maxtor with that firmware is
> >definitely broken. It _appeared_ to work if the depth was limited to 4,
> >but I didn't test it long enough to be absolutely certain. So the safest
> >is indeed to blacklist it.
> 
> Yes, broken on the Silicon Image controllers for sure.
> But what type of controller did you observe the failures on, Jens ?

achi

-- 
Jens Axboe

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/