[git patches] libata fixes
From: Jeff Garzik
Date: Thu Mar 01 2007 - 21:08:58 EST
Does not include Alan's stuff, per recent email thread.
Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
to receive the following updates:
drivers/ata/ahci.c | 55 ++++++++++++++--------------
drivers/ata/libata-core.c | 5 ++-
drivers/ata/pata_cs5520.c | 1 -
drivers/ata/pata_isapnp.c | 1 -
drivers/ata/pata_jmicron.c | 51 ++++++--------------------
drivers/ata/pata_platform.c | 1 -
drivers/ata/sata_sil24.c | 3 --
drivers/pci/quirks.c | 83 +++++++++++++++++++++++++++---------------
8 files changed, 95 insertions(+), 105 deletions(-)
Tejun Heo (7):
libata: clear drvdata in ata_host_release(), take#2
sata_sil24: kill unused local variable idx in sil24_fill_sg()
libata: blacklist FUJITSU MHT2060BH for NCQ
pata_jmicron: drop unnecessary device programming in [re]init
jmicron ATA: reimplement jmicron ATA quirk
ahci/pata_jmicron: match class not function number
ahci: improve spurious SDB FIS handling
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 6d93240..1539734 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -200,6 +200,7 @@ struct ahci_port_priv {
/* for NCQ spurious interrupt analysis */
unsigned int ncq_saw_d2h:1;
unsigned int ncq_saw_dmas:1;
+ unsigned int ncq_saw_sdb:1;
};
static u32 ahci_scr_read (struct ata_port *ap, unsigned int sc_reg);
@@ -384,12 +385,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
{ PCI_VDEVICE(INTEL, 0x294d), board_ahci_pi }, /* ICH9 */
{ PCI_VDEVICE(INTEL, 0x294e), board_ahci_pi }, /* ICH9M */
- /* JMicron */
- { PCI_VDEVICE(JMICRON, 0x2360), board_ahci_ign_iferr }, /* JMB360 */
- { PCI_VDEVICE(JMICRON, 0x2361), board_ahci_ign_iferr }, /* JMB361 */
- { PCI_VDEVICE(JMICRON, 0x2363), board_ahci_ign_iferr }, /* JMB363 */
- { PCI_VDEVICE(JMICRON, 0x2365), board_ahci_ign_iferr }, /* JMB365 */
- { PCI_VDEVICE(JMICRON, 0x2366), board_ahci_ign_iferr }, /* JMB366 */
+ /* JMicron 360/1/3/5/6, match class to avoid IDE function */
+ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr },
/* ATI */
{ PCI_VDEVICE(ATI, 0x4380), board_ahci }, /* ATI SB600 non-raid */
@@ -1160,23 +1158,31 @@ static void ahci_host_intr(struct ata_port *ap)
}
if (status & PORT_IRQ_SDB_FIS) {
- /* SDB FIS containing spurious completions might be
- * dangerous, whine and fail commands with HSM
- * violation. EH will turn off NCQ after several such
- * failures.
- */
const __le32 *f = pp->rx_fis + RX_FIS_SDB;
- ata_ehi_push_desc(ehi, "spurious completion during NCQ "
- "issue=0x%x SAct=0x%x FIS=%08x:%08x",
- readl(port_mmio + PORT_CMD_ISSUE),
- readl(port_mmio + PORT_SCR_ACT),
- le32_to_cpu(f[0]), le32_to_cpu(f[1]));
-
- ehi->err_mask |= AC_ERR_HSM;
- ehi->action |= ATA_EH_SOFTRESET;
- ata_port_freeze(ap);
-
+ if (le32_to_cpu(f[1])) {
+ /* SDB FIS containing spurious completions
+ * might be dangerous, whine and fail commands
+ * with HSM violation. EH will turn off NCQ
+ * after several such failures.
+ */
+ ata_ehi_push_desc(ehi,
+ "spurious completions during NCQ "
+ "issue=0x%x SAct=0x%x FIS=%08x:%08x",
+ readl(port_mmio + PORT_CMD_ISSUE),
+ readl(port_mmio + PORT_SCR_ACT),
+ le32_to_cpu(f[0]), le32_to_cpu(f[1]));
+ ehi->err_mask |= AC_ERR_HSM;
+ ehi->action |= ATA_EH_SOFTRESET;
+ ata_port_freeze(ap);
+ } else {
+ if (!pp->ncq_saw_sdb)
+ ata_port_printk(ap, KERN_INFO,
+ "spurious SDB FIS %08x:%08x during NCQ, "
+ "this message won't be printed again\n",
+ le32_to_cpu(f[0]), le32_to_cpu(f[1]));
+ pp->ncq_saw_sdb = 1;
+ }
known_irq = 1;
}
@@ -1665,13 +1671,6 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
if (!printed_version++)
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
- if (pdev->vendor == PCI_VENDOR_ID_JMICRON) {
- /* Function 1 is the PATA controller except on the 368, where
- we are not AHCI anyway */
- if (PCI_FUNC(pdev->devfn))
- return -ENODEV;
- }
-
rc = pcim_enable_device(pdev);
if (rc)
return rc;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c8d44a7..ac3d120 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3346,6 +3346,8 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
/* Devices where NCQ should be avoided */
/* NCQ is slow */
{ "WDC WD740ADFD-00", NULL, ATA_HORKAGE_NONCQ },
+ /* http://thread.gmane.org/gmane.linux.ide/14907 */
+ { "FUJITSU MHT2060BH", NULL, ATA_HORKAGE_NONCQ },
/* Devices with NCQ limits */
@@ -5680,6 +5682,8 @@ static void ata_host_release(struct device *gendev, void *res)
if (host->ops->host_stop)
host->ops->host_stop(host);
+
+ dev_set_drvdata(gendev, NULL);
}
/**
@@ -5902,7 +5906,6 @@ int ata_device_add(const struct ata_probe_ent *ent)
err_out:
devres_release_group(dev, ata_device_add);
- dev_set_drvdata(dev, NULL);
VPRINTK("EXIT, returning %d\n", rc);
return 0;
}
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index c1334c6..8ff2d58 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -306,7 +306,6 @@ static void __devexit cs5520_remove_one(struct pci_dev *pdev)
struct ata_host *host = dev_get_drvdata(dev);
ata_host_detach(host);
- dev_set_drvdata(dev, NULL);
}
/**
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index d5f2e85..1a61cc8 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -128,7 +128,6 @@ static void isapnp_remove_one(struct pnp_dev *idev)
struct ata_host *host = dev_get_drvdata(dev);
ata_host_detach(host);
- dev_set_drvdata(dev, NULL);
}
static struct pnp_device_id isapnp_devices[] = {
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 7a635dd..47d0f94 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -202,49 +202,20 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
};
struct ata_port_info *port_info[2] = { &info, &info };
- u32 reg;
-
- /* PATA controller is fn 1, AHCI is fn 0 */
- if (id->driver_data != 368 && PCI_FUNC(pdev->devfn) != 1)
- return -ENODEV;
-
- /* The 365/66 have two PATA channels, redirect the second */
- if (id->driver_data == 365 || id->driver_data == 366) {
- pci_read_config_dword(pdev, 0x80, ®);
- reg |= (1 << 24); /* IDE1 to PATA IDE secondary */
- pci_write_config_dword(pdev, 0x80, reg);
- }
-
return ata_pci_init_one(pdev, port_info, 2);
}
-static int jmicron_reinit_one(struct pci_dev *pdev)
-{
- u32 reg;
-
- switch(pdev->device) {
- case PCI_DEVICE_ID_JMICRON_JMB368:
- break;
- case PCI_DEVICE_ID_JMICRON_JMB365:
- case PCI_DEVICE_ID_JMICRON_JMB366:
- /* Restore mapping or disks swap and boy does it get ugly */
- pci_read_config_dword(pdev, 0x80, ®);
- reg |= (1 << 24); /* IDE1 to PATA IDE secondary */
- pci_write_config_dword(pdev, 0x80, reg);
- /* Fall through */
- default:
- /* Make sure AHCI is turned back on */
- pci_write_config_byte(pdev, 0x41, 0xa1);
- }
- return ata_pci_device_resume(pdev);
-}
-
static const struct pci_device_id jmicron_pci_tbl[] = {
- { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB361), 361},
- { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB363), 363},
- { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB365), 365},
- { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB366), 366},
- { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB368), 368},
+ { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 361 },
+ { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 363 },
+ { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 365 },
+ { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 366 },
+ { PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368,
+ PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 368 },
{ } /* terminate list */
};
@@ -255,7 +226,7 @@ static struct pci_driver jmicron_pci_driver = {
.probe = jmicron_init_one,
.remove = ata_pci_remove_one,
.suspend = ata_pci_device_suspend,
- .resume = jmicron_reinit_one,
+ .resume = ata_pci_device_resume,
};
static int __init jmicron_init(void)
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 02ea95f..4b82a54 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -228,7 +228,6 @@ static int __devexit pata_platform_remove(struct platform_device *pdev)
struct ata_host *host = dev_get_drvdata(dev);
ata_host_detach(host);
- dev_set_drvdata(dev, NULL);
return 0;
}
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 5d083f4..b1bab82 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -647,7 +647,6 @@ static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
struct sil24_sge *sge)
{
struct scatterlist *sg;
- unsigned int idx = 0;
ata_for_each_sg(sg, qc) {
sge->addr = cpu_to_le64(sg_dma_address(sg));
@@ -656,9 +655,7 @@ static inline void sil24_fill_sg(struct ata_queued_cmd *qc,
sge->flags = cpu_to_le32(SGE_TRM);
else
sge->flags = 0;
-
sge++;
- idx++;
}
}
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 1e6eda2..1bf5482 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1218,45 +1218,68 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_a
* do this early on to make the additional device appear during
* the PCI scanning.
*/
-
-static void quirk_jmicron_dualfn(struct pci_dev *pdev)
+static void quirk_jmicron_ata(struct pci_dev *pdev)
{
- u32 conf;
+ u32 conf1, conf5, class;
u8 hdr;
/* Only poke fn 0 */
if (PCI_FUNC(pdev->devfn))
return;
- switch(pdev->device) {
- case PCI_DEVICE_ID_JMICRON_JMB365:
- case PCI_DEVICE_ID_JMICRON_JMB366:
- /* Redirect IDE second PATA port to the right spot */
- pci_read_config_dword(pdev, 0x80, &conf);
- conf |= (1 << 24);
- /* Fall through */
- pci_write_config_dword(pdev, 0x80, conf);
- case PCI_DEVICE_ID_JMICRON_JMB361:
- case PCI_DEVICE_ID_JMICRON_JMB363:
- pci_read_config_dword(pdev, 0x40, &conf);
- /* Enable dual function mode, AHCI on fn 0, IDE fn1 */
- /* Set the class codes correctly and then direct IDE 0 */
- conf &= ~0x000FF200; /* Clear bit 9 and 12-19 */
- conf |= 0x00C2A102; /* Set 1, 8, 13, 15, 17, 22, 23 */
- pci_write_config_dword(pdev, 0x40, conf);
-
- /* Reconfigure so that the PCI scanner discovers the
- device is now multifunction */
-
- pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);
- pdev->hdr_type = hdr & 0x7f;
- pdev->multifunction = !!(hdr & 0x80);
+ pci_read_config_dword(pdev, 0x40, &conf1);
+ pci_read_config_dword(pdev, 0x80, &conf5);
- break;
+ conf1 &= ~0x00CFF302; /* Clear bit 1, 8, 9, 12-19, 22, 23 */
+ conf5 &= ~(1 << 24); /* Clear bit 24 */
+
+ switch (pdev->device) {
+ case PCI_DEVICE_ID_JMICRON_JMB360:
+ /* The controller should be in single function ahci mode */
+ conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */
+ break;
+
+ case PCI_DEVICE_ID_JMICRON_JMB365:
+ case PCI_DEVICE_ID_JMICRON_JMB366:
+ /* Redirect IDE second PATA port to the right spot */
+ conf5 |= (1 << 24);
+ /* Fall through */
+ case PCI_DEVICE_ID_JMICRON_JMB361:
+ case PCI_DEVICE_ID_JMICRON_JMB363:
+ /* Enable dual function mode, AHCI on fn 0, IDE fn1 */
+ /* Set the class codes correctly and then direct IDE 0 */
+ conf1 |= 0x00C2A102; /* Set 1, 8, 13, 15, 17, 22, 23 */
+ break;
+
+ case PCI_DEVICE_ID_JMICRON_JMB368:
+ /* The controller should be in single function IDE mode */
+ conf1 |= 0x00C00000; /* Set 22, 23 */
+ break;
}
-}
-DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
+
+ pci_write_config_dword(pdev, 0x40, conf1);
+ pci_write_config_dword(pdev, 0x80, conf5);
+
+ /* Update pdev accordingly */
+ pci_read_config_byte(pdev, PCI_HEADER_TYPE, &hdr);
+ pdev->hdr_type = hdr & 0x7f;
+ pdev->multifunction = !!(hdr & 0x80);
+
+ pci_read_config_dword(pdev, PCI_CLASS_REVISION, &class);
+ pdev->class = class >> 8;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
#endif
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/