Re: [lm-sensors] Could the k8temp driver be interfering with ACPI?

[Matthew Garrett]

On Fri, Mar 02, 2007 at 10:04:54PM +0100, Jean Delvare wrote:
> On Fri, 2 Mar 2007 14:18:40 +0000, Matthew Garrett wrote:
> > In theory I /think/ so, but it would probably end up being an 
> > overestimate of the coverage actually needed. Trapping at runtime is 
> > arguably more elegant?
> 
> It might be more elegant but it won't work. We don't want to prevent
> ACPI from accessing these I/O ports. If we need to choose only one
> "driver" accessing the I/O port, it must be acpi, at leat for now,
> despite the fact that acpi provides very weak hardware monitoring
> capabilities compared to the specific drivers.

Assuming arbitration of access, what's the problem with having two 
drivers accessing the same hardware? Do these chips generally have any 
significant internal state other than trip points and the like?

> Why would we end up with an overestimation if we check the I/O ports at
> boot time? Do you have concrete cases in mind?

ACPI will often describe large operation regions, but won't necessarily 
touch all of them. Effectively, every codepath would have to be walked 
through at boot time and checked for io access.

-- 
Matthew Garrett | mjg59@xxxxxxxxxxxxx
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/