2.6.21-rc3-mm2: BUG: at drivers/pci/pci.c:679 pci_restore_state during suspend testing
From: Rafael J. Wysocki
Date: Thu Mar 08 2007 - 19:11:07 EST
Hi,
I get the following traces from 2.6.21-rc3-mm2 during the "resume" phase
of testing with 'echo test > /sys/power/disk && echo disk > /sys/power/state':
acpi thermal:00: resuming
pci 0000:00:00.0: resuming
pcieport-driver 0000:00:01.0: resuming
BUG: at drivers/pci/pci.c:679 pci_restore_state()
Call Trace:
[<ffffffff803ab3e9>] pci_restore_state+0x229/0x270
[<ffffffff803b10f9>] pcie_portdrv_restore_config+0x19/0x40
[<ffffffff803b1171>] pcie_portdrv_resume+0x11/0x20
[<ffffffff803ad92c>] pci_device_resume+0x2c/0x70
[<ffffffff80411d41>] resume_device+0xe1/0x160
[<ffffffff80411e69>] dpm_resume+0xa9/0x110
[<ffffffff80411f18>] device_resume+0x48/0x60
[<ffffffff802bb355>] pm_suspend_disk+0x235/0x250
[<ffffffff802b99c5>] enter_state+0x65/0x250
[<ffffffff802b9c2a>] state_store+0x7a/0xa0
[<ffffffff80316734>] subsys_attr_store+0x24/0x30
[<ffffffff803168a0>] sysfs_write_file+0x100/0x140
[<ffffffff802181cf>] vfs_write+0xdf/0x180
[<ffffffff80218d10>] sys_write+0x50/0x90
[<ffffffff8026529e>] system_call+0x7e/0x83
PCI: Setting latency timer of device 0000:00:01.0 to 64
pcieport-driver 0000:00:02.0: resuming
BUG: at drivers/pci/pci.c:679 pci_restore_state()
Call Trace:
[<ffffffff803ab3e9>] pci_restore_state+0x229/0x270
[<ffffffff803b10f9>] pcie_portdrv_restore_config+0x19/0x40
[<ffffffff803b1171>] pcie_portdrv_resume+0x11/0x20
[<ffffffff803ad92c>] pci_device_resume+0x2c/0x70
[<ffffffff80411d41>] resume_device+0xe1/0x160
[<ffffffff80411e69>] dpm_resume+0xa9/0x110
[<ffffffff80411f18>] device_resume+0x48/0x60
[<ffffffff802bb355>] pm_suspend_disk+0x235/0x250
[<ffffffff802b99c5>] enter_state+0x65/0x250
[<ffffffff802b9c2a>] state_store+0x7a/0xa0
[<ffffffff80316734>] subsys_attr_store+0x24/0x30
[<ffffffff803168a0>] sysfs_write_file+0x100/0x140
[<ffffffff802181cf>] vfs_write+0xdf/0x180
[<ffffffff80218d10>] sys_write+0x50/0x90
[<ffffffff8026529e>] system_call+0x7e/0x83
PCI: Setting latency timer of device 0000:00:02.0 to 64
agpgart-amd64 0000:00:04.0: resuming
pci 0000:00:05.0: resuming
PCI: Setting latency timer of device 0000:00:05.0 to 64
pci 0000:00:06.0: resuming
PCI: Setting latency timer of device 0000:00:06.0 to 64
pci 0000:00:07.0: resuming
pci 0000:00:07.1: resuming
Intel ICH 0000:00:08.0: resuming
ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 18 (level, low) -> IRQ 18
uli526x 0000:00:11.0: resuming
ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:12.0: resuming
sata_uli 0000:00:12.1: resuming
ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 19 (level, low) -> IRQ 19
ohci_hcd 0000:00:13.0: resuming
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 20 (level, low) -> IRQ 20
ohci_hcd 0000:00:13.1: resuming
ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 21 (level, low) -> IRQ 21
ohci_hcd 0000:00:13.2: resuming
ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 22 (level, low) -> IRQ 22
ehci_hcd 0000:00:13.3: resuming
PCI: Enabling device 0000:00:13.3 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:13.3[D] -> GSI 23 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:13.3 to 64
PM: Writing back config space on device 0000:00:13.3 at offset f (was 20100400, writing 20100405)
PM: Writing back config space on device 0000:00:13.3 at offset 4 (was 0, writing ff6fe800)
PM: Writing back config space on device 0000:00:13.3 at offset 3 (was 804000, writing 802010)
PM: Writing back config space on device 0000:00:13.3 at offset 1 (was 2b00006, writing 2b00116)
pci 0000:00:18.0: resuming
pci 0000:00:18.1: resuming
pci 0000:00:18.2: resuming
k8temp 0000:00:18.3: resuming
pci 0000:01:00.0: resuming
BUG: at drivers/pci/pci.c:679 pci_restore_state()
Call Trace:
[<ffffffff803ab3e9>] pci_restore_state+0x229/0x270
[<ffffffff803ad93a>] pci_device_resume+0x3a/0x70
[<ffffffff80411d41>] resume_device+0xe1/0x160
[<ffffffff80411e69>] dpm_resume+0xa9/0x110
[<ffffffff80411f18>] device_resume+0x48/0x60
[<ffffffff802bb355>] pm_suspend_disk+0x235/0x250
[<ffffffff802b99c5>] enter_state+0x65/0x250
[<ffffffff802b9c2a>] state_store+0x7a/0xa0
[<ffffffff80316734>] subsys_attr_store+0x24/0x30
[<ffffffff803168a0>] sysfs_write_file+0x100/0x140
[<ffffffff802181cf>] vfs_write+0xdf/0x180
[<ffffffff80218d10>] sys_write+0x50/0x90
[<ffffffff8026529e>] system_call+0x7e/0x83
pci 0000:01:00.1: resuming
BUG: at drivers/pci/pci.c:679 pci_restore_state()
Call Trace:
[<ffffffff803ab3e9>] pci_restore_state+0x229/0x270
[<ffffffff803ad93a>] pci_device_resume+0x3a/0x70
[<ffffffff80411d41>] resume_device+0xe1/0x160
[<ffffffff80411e69>] dpm_resume+0xa9/0x110
[<ffffffff80411f18>] device_resume+0x48/0x60
[<ffffffff802bb355>] pm_suspend_disk+0x235/0x250
[<ffffffff802b99c5>] enter_state+0x65/0x250
[<ffffffff802b9c2a>] state_store+0x7a/0xa0
[<ffffffff80316734>] subsys_attr_store+0x24/0x30
[<ffffffff803168a0>] sysfs_write_file+0x100/0x140
[<ffffffff802181cf>] vfs_write+0xdf/0x180
[<ffffffff80218d10>] sys_write+0x50/0x90
[<ffffffff8026529e>] system_call+0x7e/0x83
8139too 0000:04:06.0: resuming
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/