Re: 2.6.20*: PATA DMA timeout, hangs (2)

[Frank van Maarseveen]

On Mon, Mar 12, 2007 at 12:07:18PM +0000, Alistair John Strachan wrote:
> On Monday 12 March 2007 11:24, Frank van Maarseveen wrote:
> > On Mon, Mar 12, 2007 at 09:54:47AM +0100, Frank van Maarseveen wrote:
> > > 2.6.19 is ok, 2.6.20.[12] hangs from the moment DMA is turned on (hdparm
> > > -d 1 /dev/hda):
> > >
> > > 	hda: dma_timer_expiry: dma status == 0x20
> > > 	hda: DMA timeout retry
> > > 	hda: timeout waiting for DMA
> > > 	hda: status error: status=0x58 {
> > > 	DriveReady
> > > 	SeekComplete
> > > 	DataRequest
> > > 	}
> [snip]
> > This system has SATA but there's only one PATA disk
> 
> Not a solution, unfortunately, but try disabling CONFIG_IDE and using Alan's 
> new PATA drivers. For your Intel systems, this should mean you need only:
> 
> CONFIG_ATA_PIIX
> 
> For both SATA and PATA support. You'll need the appropriate SCSI modules built 
> in (if you say =y), i.e. SCSI disk and SCSI CDROM should be built in.

yes, that worked... after booting with root=/dev/sda2 and s/hda/sda/
/etc/fstab /etc/lilo.conf + lilo. didn't mount a /dev/sr0 for a loong
time.

So, are /dev/hd* going to disappear in a few years? iow, does it make
sense to _slowly_ start to migrate to /dev/sd*?

The problem is there's no plan B in case of any troubles except rename
everything back again to boot an old kernel.

-- 
Frank
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/