[PATCH UPDATED] fix typo in drivers/block/Kconfig

[Patrick Ringl]

Hello,

[ ... Fixed two minor typos. ...]

The following patch is against 2.6.21-rc4:


--- linux-2.6.20-o/drivers/block/Kconfig	2007-03-18 00:04:53.000000000 +0100
+++ linux-2.6.20/drivers/block/Kconfig	2007-03-25 03:35:19.000000000 +0200
@@ -383,7 +383,7 @@
 	default "16"
 	depends on BLK_DEV_RAM
 	help
-	  The default value is 16 RAM disks. Change this if you know what
+	  The default value is 16 RAM disks. Change this if you know what you
 	  are doing. If you boot from a filesystem that needs to be extracted
 	  in memory, you will need at least one RAM disk (e.g. root on cramfs).

@@ -393,7 +393,7 @@
 	default "4096"
 	help
 	  The default value is 4096 kilobytes. Only change this if you know
-	  what are you doing. If you are using IBM S/390, then set this to
+	  what you are doing. If you are using IBM S/390, then set this to
 	  8192.

 config BLK_DEV_RAM_BLOCKSIZE




---

regards,
Patrick




--- linux-2.6.20-o/drivers/block/Kconfig	2007-03-18 00:04:53.000000000 +0100
+++ linux-2.6.20/drivers/block/Kconfig	2007-03-25 03:35:19.000000000 +0200
@@ -383,7 +383,7 @@
 	default "16"
 	depends on BLK_DEV_RAM
 	help
-	  The default value is 16 RAM disks. Change this if you know what
+	  The default value is 16 RAM disks. Change this if you know what you
 	  are doing. If you boot from a filesystem that needs to be extracted
 	  in memory, you will need at least one RAM disk (e.g. root on cramfs).
 
@@ -393,7 +393,7 @@
 	default "4096"
 	help
 	  The default value is 4096 kilobytes. Only change this if you know
-	  what are you doing. If you are using IBM S/390, then set this to
+	  what you are doing. If you are using IBM S/390, then set this to
 	  8192.
 
 config BLK_DEV_RAM_BLOCKSIZE