Re: [PATCH 3/4] [SCSI]stex: fix reset recovery for console device

[James Bottomley]

On Fri, 2007-03-30 at 15:21 -0700, Ed Lin wrote:
> After reset completed, the scsi error handler sends out START_STOP
> and TEST_UNIT_READY to the device. For 'normal' devices these
> commands will be handled by firmware. However, because the RAID
> console only interfaces to scsi mid layer, the firmware will not process
> these commands for it. This will make the console to be offlined right
> after reset. Add the handling in driver to fix this problem.

I don't see how this explanation can be correct.  The error handler only
sends a START_STOP command if sdev->allow_restart is one, which you have
to set in the slave_configure routines (which stex doesn't).  If you're
seeing a START_STOP in the eh path, there's something else wrong.
TEST_UNIT_READY, certainly ... it's part of a restart check.

James


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/