Re: 2.6.20.3 AMD64 oops in CFQ code

[Tejun Heo]

linux@xxxxxxxxxxx wrote:
> linux@xxxxxxxxxxx wrote:
>>> Anyway, what's annoying is that I can't figure out how to bring the
>>> drive back on line without resetting the box.  It's in a hot-swap enclosure,
>>> but power cycling the drive doesn't seem to help.  I thought libata hotplug
>>> was working?  (SiI3132 card, using the sil24 driver.)
> 
>> Yeah, it's working but failing resets are considered highly dangerous
>> (in that the controller status is unknown and may cause something
>> dangerous like screaming interrupts) and port is muted after that.  The
>> plan is to handle this with polling hotplug such that libata tries to
>> revive the port if PHY status change is detected by polling.  Patches
>> are available but they need other things to resolved to get integrated.
>> I think it'll happen before the summer.
> 
>> Anyways, you can tell libata to retry the port by manually telling it to
>> rescan the port (echo - - - > /sys/class/scsi_host/hostX/scan).
> 
> Ah, thank you!  I have to admit, that is at least as mysterious as any
> Microsoft registry tweak.

Polling hotplug should fix this.  I thought I would be able to merge it
much earlier.  I apparently was way too optimistic.  :-(

>>> (H'm... after rebooting, reallocated sectors jumped from 26 to 39.
>>> Something is up with that drive.)
> 
>> Yeap, seems like a broken drive to me.
> 
> Actually, after a few rounds, the reallocated sectors stabilized at 56
> and all is working well again.  It's like there was a major problem with
> error handling.
> 
> The problem is that I don't know where the blame lies.

I'm pretty sure it's the firmware's fault.  It's not supposed to go out
for lunch like that even when internal error occurs.

-- 
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/