[ALSA] 2.6.21 loading of module snd_ymfpci takes 2 minutes

[Santiago Garcia Mantinan]

I have just upgraded from 2.6.20 to 2.6.21, when I rebooted I thought the
computer had halted after loading snd_ymfpci, but what happens is that it
takes 2 minutes (120 seconds mesured with time) for the driver to load, but
then works as expected.

After making a diff between the 2.6.20 and 2.6.21 versions of the ymfpci
driver I decided to replace the ymfpci_main.c from 2.6.21 with the one from
2.6.20, it compiled with a few warnings and then worked ok, like it used to
work, without the two minutes delay.

These are the messages I get from the kernel when I load the driver:
PCI: Enabling device 0000:00:0a.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9

This is the info I got for the sound card, which is integrated on the
motherboard:

Card: Yamaha DS-1L (YMF740C)
Chip: Asahi Kasei AK4543

lspci:
00:0a.0 0401: 1073:000c (rev 03)
        Subsystem: 1033:804b
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+
        Latency: 64 (1250ns min, 6250ns max)
        Interrupt: pin A routed to IRQ 9
        Region 0: Memory at e8108000 (32-bit, non-prefetchable) [size=32K]
        Capabilities: <access denied>

/proc/asound/cards:
 0 [YMF740C        ]: YMF740C - Yamaha DS-1L (YMF740C)
                      Yamaha DS-1L (YMF740C) at 0xe8108000, irq 9

Hope that helps to diagnose the problem, if you need any other info don't
hesitate to contact me.

Regards...
-- 
Santiago García Mantiñán
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/