Re: suspend2 merge (was Re: [Suspend2-devel] Re: CFS and suspend2:hang in atomic copy)

[Linus Torvalds]

On Thu, 26 Apr 2007, Alan Cox wrote:
>
> > The PCI spec for controlling DMA is really pretty nasty. You can disable 
> > it in the PCI config word, of course, but that usually just messes up the 
> > device entirely.
> 
> And some devices ignore it. Some of the older Cyrix stuff I have appears
> not to care how the master bit is set.

I'm not surprised. If the choice is between locking up the PCI bus by 
hanging the device in endless retries, or just ignoring the bit, I suspect 
"just ignore it" is actually the better choice.

Of course, in a perfect world you'd happily honor it, raise a PCI error, 
and all is good, but in practice the internal state machine of most 
non-trivial hardware is simply so complicated that the "abort gracefully" 
simply isn't an option.

The hw people have enough problems in getting things to work when 
everything is peachy and well, and a lot of companies end up releasing 
stuff with known errata for even the _normal_ cases, just because they 
expect software to work around them ("Doctor, doctor, it hurts when I do 
the documented access!" "You didn't read errata #317, did you? Don't do 
that, then!")

			Linus
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/