mptscsi timeout error

From: Manfred Schultz
Date: Fri Apr 27 2007 - 11:59:40 EST


1. mptscsi timeout error
========================


2. problem/report
=================

I want to configure a parallel file system. I checked 'lustre', 'GFS' and
'PVFS2' on different systems and found always the same or a similary errors.
Wenn I try to write 50 files on the filesystem parallel (this should be possible
on our cluster), it stopps with an timeout-error. This example is for PVFS2.

It is installed PVFS2 for a single host (for a first test). Only one 2TB filesystem
(/dev/sdb1) is used. PVFS2 seems to work. 50 files of about 10GB will be written.
Two scripts will be started with commands "df; ls -l /mnt/pvfs2/test; sleep 1"
in a loop (one by user 'root'). Test failed after about 3 hours.

The raids are connected via LSI fiber-cannel-adapter and and QLogic FC switch.
In a former test I connected the machine and the raid directly and got the same error.

I checked also 'lustre' and 'GFS' in a similary configuration and found the same
situation: stop of running processes, reboot required. The system log starts always
with the timeout error message. It seems to be that error recovery goes in a loop.
The combination 'lustre' and SCSI-raid produced the same error.
The same test but using an ext3-filesystem was successfull.


3. Keywords
===========

mptscsi, timeout, fusion

4. Kernel:
==========

Linux version 2.6.21 (root@xxxxxxxxxxxxxxx) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Fri Apr 27 10:08:35 CEST 2007
.. and older versions, 2.6.20.7

5. /var/log/messages:
=====================

First scsi/error message:
Apr 27 14:04:34 luise17 kernel: mptscsih: ioc0: attempting task abort! (sc=ffff8101f36b2500)
Apr 27 14:04:34 luise17 kernel: sd 4:0:4:0:
Apr 27 14:04:34 luise17 kernel: command: Write(10): 2a 00 18 d5 7f df 00 00 88 00
Apr 27 14:04:44 luise17 kernel: mptbase: ioc0: ERROR - Doorbell INT timeout (count=4999), IntStatus=80000000!
Apr 27 14:04:44 luise17 kernel: mptscsih: ioc0: Issue of TaskMgmt failed!
Apr 27 14:04:44 luise17 kernel: mptscsih: ioc0: task abort: FAILED (sc=ffff8101f36b2500)
Apr 27 14:04:44 luise17 kernel: mptscsih: ioc0: attempting task abort! (sc=ffff810220ec4280)
Apr 27 14:04:44 luise17 kernel: sd 4:0:4:0:
Apr 27 14:04:44 luise17 kernel: command: Write(10): 2a 00 18 d7 91 7f 00 01 40 00
Apr 27 14:04:54 luise17 kernel: mptbase: ioc0: ERROR - Doorbell INT timeout (count=4999), IntStatus=80000000!
Apr 27 14:04:54 luise17 kernel: mptscsih: ioc0: Issue of TaskMgmt failed!
Apr 27 14:04:54 luise17 kernel: mptscsih: ioc0: task abort: FAILED (sc=ffff810220ec4280)
Apr 27 14:04:54 luise17 kernel: mptscsih: ioc0: attempting task abort! (sc=ffff8102296b30c0)
Apr 27 14:04:54 luise17 kernel: sd 4:0:4:0:
Apr 27 14:04:54 luise17 kernel: command: Write(10): 2a 00 18 d7 92 bf 00 01 40 00
... infinite loop


6. Program: called in a loop, 50 times, parallel.
=================================================

program mkf5
implicit none
integer :: l,n,m
integer :: i,j,k,ll,l2,kk,s
real (kind=8), allocatable :: a(:)
character (len=22) :: filename
10 format ('Satzlaenge = ',i12)
20 format (A,' ',2i8)
30 format ("/mnt/pvfs2/test/P.",i4.4)
40 format ('Open Status =',i5)
read (*,*) k,l,m
n=l/8
write (*,10) n*8
allocate(a(n))
write (filename,30) k
write (*,20) filename,l,m
open (1,file=filename,status='unknown',form='unformatted',iostat=s)
if (s/=0) write (8,40) s
do j=1, m
do i=1,n
a(i)=float(j)+float(i)*1.0e-5
end do
write (1) a
end do
close(1)
end program mkf5

Input line: number-of-process 100000 100000


7.1 Environment
===============

System: CentOS 5, kernel 2.6.21, pvfs-2.6.3

ver_linux:
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.

Linux luise17.cluster 2.6.21 #1 SMP Fri Apr 27 10:08:35 CEST 2007 x86_64 x86_64 x86_64 GNU/Linux

Gnu C 4.1.1
Gnu make 3.81
binutils 2.17.50.0.6-2.el5
util-linux 2.13-pre7
mount 2.13-pre7
module-init-tools 3.3-pre2
e2fsprogs 1.39
pcmciautils 014
quota-tools 3.13.
PPP 2.4.4
Linux C Library > libc.2.5
Dynamic linker (ldd) 2.5
Procps 3.2.7
Net-tools 1.60
Kbd 1.12
oprofile 0.9.2
Sh-utils 5.97
udev 095
wireless-tools 28
Modules Loaded pvfs2 autofs4 hidp rfcomm l2cap bluetooth sunrpc iptable_filter ip_tables ip6t_REJECT xt_tcpudp ip6table_filter ip6_tables x_tables ipv6 video sbs i2c_ec button battery asus_acpi ac lp floppy sg i2c_nforce2 ib_mthca ib_mad k8temp pcspkr ib_core hwmon i2c_core e100 tg3 mii parport_pc parport serio_raw dm_snapshot dm_zero dm_mirror dm_mod mptfc mptscsih scsi_transport_fc mptbase ext3 jbd ehci_hcd ohci_hcd uhci_hcd sata_nv libata sd_mod scsi_mod


7.2 Processor
=============

processor : 0
vendor_id : AuthenticAMD
cpu family : 15
model : 37
model name : AMD Opteron(tm) Processor 250
stepping : 1
cpu MHz : 2411.155
cache size : 1024 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm
bogomips : 4823.60
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp

processor : 1
vendor_id : AuthenticAMD
cpu family : 15
model : 37
model name : AMD Opteron(tm) Processor 250
stepping : 1
cpu MHz : 2411.155
cache size : 1024 KB
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt lm 3dnowext 3dnow pni lahf_lm
bogomips : 4821.52
TLB size : 1024 4K pages
clflush size : 64
cache_alignment : 64
address sizes : 40 bits physical, 48 bits virtual
power management: ts fid vid ttp


7.3. Module information
=======================


pvfs2 117808 2 - Live 0xffffffff88377000
autofs4 41160 2 - Live 0xffffffff8836b000
hidp 54592 2 - Live 0xffffffff8835c000
rfcomm 73192 0 - Live 0xffffffff88349000
l2cap 57280 10 hidp,rfcomm, Live 0xffffffff8833a000
bluetooth 88836 5 hidp,rfcomm,l2cap, Live 0xffffffff88323000
sunrpc 196648 1 - Live 0xffffffff882f1000
iptable_filter 19968 0 - Live 0xffffffff882eb000
ip_tables 38624 1 iptable_filter, Live 0xffffffff882e0000
ip6t_REJECT 22592 1 - Live 0xffffffff882d9000
xt_tcpudp 20352 6 - Live 0xffffffff882d3000
ip6table_filter 19776 1 - Live 0xffffffff882cd000
ip6_tables 33216 1 ip6table_filter, Live 0xffffffff882c3000
x_tables 37576 4 ip_tables,ip6t_REJECT,xt_tcpudp,ip6_tables, Live 0xffffffff882b8000
ipv6 364192 27 ip6t_REJECT, Live 0xffffffff8825e000
video 36240 0 - Live 0xffffffff88254000
sbs 33728 0 - Live 0xffffffff8824a000
i2c_ec 22656 1 sbs, Live 0xffffffff88243000
button 25888 0 - Live 0xffffffff8823b000
battery 28040 0 - Live 0xffffffff88233000
asus_acpi 35628 0 - Live 0xffffffff88229000
ac 22856 0 - Live 0xffffffff88222000
lp 30928 0 - Live 0xffffffff88219000
floppy 79848 0 - Live 0xffffffff88204000
sg 53992 0 - Live 0xffffffff881f5000
i2c_nforce2 22976 0 - Live 0xffffffff881ee000
ib_mthca 141700 0 - Live 0xffffffff881ca000
ib_mad 54500 1 ib_mthca, Live 0xffffffff881bb000
k8temp 23040 0 - Live 0xffffffff881b4000
pcspkr 20160 0 - Live 0xffffffff881ae000
ib_core 71040 2 ib_mthca,ib_mad, Live 0xffffffff8819b000
hwmon 20360 1 k8temp, Live 0xffffffff88195000
i2c_core 40704 2 i2c_ec,i2c_nforce2, Live 0xffffffff88188000
e100 53648 0 - Live 0xffffffff88177000
tg3 125060 0 - Live 0xffffffff88155000
mii 22656 1 e100, Live 0xffffffff8814e000
parport_pc 46376 0 - Live 0xffffffff88141000
parport 57100 2 lp,parport_pc, Live 0xffffffff88132000
serio_raw 24388 0 - Live 0xffffffff8812b000
dm_snapshot 33544 0 - Live 0xffffffff88121000
dm_zero 18816 0 - Live 0xffffffff8811b000
dm_mirror 38080 0 - Live 0xffffffff88110000
dm_mod 77136 5 dm_snapshot,dm_zero,dm_mirror, Live 0xffffffff880fc000
mptfc 34056 3 - Live 0xffffffff880f2000
mptscsih 40128 1 mptfc, Live 0xffffffff880e7000
scsi_transport_fc 56516 1 mptfc, Live 0xffffffff880d8000
mptbase 73504 2 mptfc,mptscsih, Live 0xffffffff880c5000
ext3 140560 7 - Live 0xffffffff880a1000
jbd 80496 1 ext3, Live 0xffffffff8808c000
ehci_hcd 50700 0 - Live 0xffffffff8807e000
ohci_hcd 38148 0 - Live 0xffffffff88073000
uhci_hcd 42016 0 - Live 0xffffffff88067000
sata_nv 38788 7 - Live 0xffffffff8805c000
libata 138208 1 sata_nv, Live 0xffffffff88039000
sd_mod 38272 12 - Live 0xffffffff8802e000
scsi_mod 173240 6 sg,mptfc,mptscsih,scsi_transport_fc,libata,sd_mod, Live 0xffffffff88002000


7.4. Loaded driver and hardware information
===========================================

/proc/ioports:

0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : 0000:00:06.0
01f0-01f7 : 0000:00:06.0
02f8-02ff : serial
0376-0376 : 0000:00:06.0
03c0-03df : vga+
03f2-03f5 : floppy
03f6-03f6 : 0000:00:06.0
03f7-03f7 : floppy DIR
03f8-03ff : serial
0cf8-0cff : PCI conf1
1000-101f : 0000:00:01.1
1400-140f : 0000:00:06.0
1400-1407 : ide0
1408-140f : ide1
1410-141f : 0000:00:07.0
1410-141f : sata_nv
1420-142f : 0000:00:08.0
1420-142f : sata_nv
1430-1433 : 0000:00:07.0
1430-1433 : sata_nv
1434-1437 : 0000:00:07.0
1434-1437 : sata_nv
1438-143f : 0000:00:07.0
1438-143f : sata_nv
1440-1447 : 0000:00:07.0
1440-1447 : sata_nv
1448-144b : 0000:00:08.0
1448-144b : sata_nv
144c-144f : 0000:00:08.0
144c-144f : sata_nv
1450-1457 : 0000:00:08.0
1450-1457 : sata_nv
1458-145f : 0000:00:08.0
1458-145f : sata_nv
2000-2fff : PCI Bus #01
2000-20ff : 0000:01:06.0
2400-243f : 0000:01:08.0
2400-243f : e100
3000-3fff : PCI Bus #19
3000-30ff : 0000:19:03.0
5000-503f : 0000:00:01.1
5000-503f : pnp 00:02
5000-503f : nForce2_smbus
5040-507f : 0000:00:01.1
5040-507f : pnp 00:02
5040-507f : nForce2_smbus
8000-807f : pnp 00:02
8000-8003 : ACPI PM1a_EVT_BLK
8004-8005 : ACPI PM1a_CNT_BLK
8008-800b : ACPI PM_TMR
8010-8015 : ACPI CPU throttle
801c-801c : ACPI PM2_CNT_BLK
8020-8027 : ACPI GPE0_BLK
8080-80ff : pnp 00:02
8400-847f : pnp 00:02
8480-84ff : pnp 00:02
8800-887f : pnp 00:02
8880-88ff : pnp 00:02


/proc/iomem:
00000000-000987ff : System RAM
00000000-00000000 : Crash kernel
00098800-0009ffff : reserved
000c2000-000fffff : reserved
00100000-bff1ffff : System RAM
01000000-0122fb27 : Kernel code
0122fb28-0134777f : Kernel data
08000000-0bffffff : GART
bff20000-bff25fff : ACPI Tables
bff26000-bff7ffff : ACPI Non-volatile Storage
bff80000-bfffffff : reserved
c2000000-c20fffff : PCI Bus #01
c2000000-c201ffff : 0000:01:06.0
c2100000-c21fffff : PCI Bus #19
c2100000-c21fffff : 0000:19:03.0
c2200000-c22fffff : PCI Bus #1a
c2200000-c220ffff : 0000:1a:09.0
c2210000-c221ffff : 0000:1a:09.1
dc000000-dc000fff : 0000:00:02.0
dc000000-dc000fff : ohci_hcd
dc001000-dc0010ff : 0000:00:02.1
dc001000-dc0010ff : ehci_hcd
dc002000-dc002fff : 0000:00:07.0
dc002000-dc002fff : sata_nv
dc003000-dc003fff : 0000:00:08.0
dc003000-dc003fff : sata_nv
dc100000-ddffffff : PCI Bus #01
dc100000-dc100fff : 0000:01:06.0
dc101000-dc101fff : 0000:01:08.0
dc101000-dc101fff : e100
dc120000-dc13ffff : 0000:01:08.0
dc120000-dc13ffff : e100
dd000000-ddffffff : 0000:01:06.0
de000000-de0fffff : PCI Bus #02
de000000-de0fffff : 0000:02:00.0
de06174c-de06174f : ib_mthca
de072000-de0720ff : ib_mthca
de080680-de08069b : ib_mthca
de082a50-de082a8f : ib_mthca
de0f00d8-de0f00df : ib_mthca
de800000-deffffff : PCI Bus #02
de800000-deffffff : 0000:02:00.0
de800000-deffffff : ib_mthca
df000000-df000fff : IOAPIC 1
df000000-df000fff : 0000:18:0a.1
df001000-df001fff : IOAPIC 2
df001000-df001fff : 0000:18:0b.1
df100000-df1fffff : PCI Bus #19
df100000-df10ffff : 0000:19:03.0
df110000-df113fff : 0000:19:03.0
df200000-df2fffff : PCI Bus #1a
df200000-df20ffff : 0000:1a:09.0
df200000-df20ffff : tg3
df210000-df21ffff : 0000:1a:09.1
df210000-df21ffff : tg3
e0000000-efffffff : reserved
fec00000-fec00fff : IOAPIC 0
fec00000-fec003ff : reserved
fee00000-fee00fff : Local APIC
fefff000-feffffff : pnp 00:00
fff80000-ffffffff : reserved
100000000-23fffffff : System RAM


7.5. PCI information
====================


00:00.0 Memory controller: nVidia Corporation CK804 Memory Controller (rev a3)
Subsystem: Tyan Computer Unknown device 2892
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [e0] HyperTransport: MSI Mapping

00:01.0 ISA bridge: nVidia Corporation CK804 ISA Bridge (rev a3)
Subsystem: Tyan Computer Unknown device 2892
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: I/O ports at <ignored>

00:01.1 SMBus: nVidia Corporation CK804 SMBus (rev a2)
Subsystem: Tyan Computer Unknown device 2892
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 1000 [size=32]
Region 4: I/O ports at 5000 [size=64]
Region 5: I/O ports at 5040 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.0 USB Controller: nVidia Corporation CK804 USB Controller (rev a2) (prog-if 10 [OHCI])
Subsystem: Tyan Computer Unknown device 2892
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.1 USB Controller: nVidia Corporation CK804 USB Controller (rev a3) (prog-if 20 [EHCI])
Subsystem: Tyan Computer Unknown device 2892
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: Memory at dc001000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:06.0 IDE interface: nVidia Corporation CK804 IDE (rev f2) (prog-if 8a [Master SecP PriP])
Subsystem: Tyan Computer Unknown device 2892
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at 1400 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: Tyan Computer Unknown device 2892
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at 1440 [size=8]
Region 1: I/O ports at 1434 [size=4]
Region 2: I/O ports at 1438 [size=8]
Region 3: I/O ports at 1430 [size=4]
Region 4: I/O ports at 1410 [size=16]
Region 5: Memory at dc002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:08.0 IDE interface: nVidia Corporation CK804 Serial ATA Controller (rev f3) (prog-if 85 [Master SecO PriO])
Subsystem: Tyan Computer Unknown device 2892
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 1458 [size=8]
Region 1: I/O ports at 144c [size=4]
Region 2: I/O ports at 1450 [size=8]
Region 3: I/O ports at 1448 [size=4]
Region 4: I/O ports at 1420 [size=16]
Region 5: Memory at dc003000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:09.0 PCI bridge: nVidia Corporation CK804 PCI Bridge (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00002000-00002fff
Memory behind bridge: dc100000-ddffffff
Prefetchable memory behind bridge: c2000000-c20fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR+
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:0d.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: de000000-de0fffff
Prefetchable memory behind bridge: 00000000de800000-00000000def00000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+
Address: 00000000fee00000 Data: 4049
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <512ns, L1 <4us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x4, ASPM L0s, Port 1
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 2, PowerLimit 25.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-

00:0e.0 PCI bridge: nVidia Corporation CK804 PCIE Bridge (rev a3) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: fff00000-000fffff
Prefetchable memory behind bridge: 00000000fff00000-0000000000000000
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Message Signalled Interrupts: 64bit+ Queue=0/1 Enable+
Address: 00000000fee00000 Data: 4051
Capabilities: [58] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <512ns, L1 <4us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s, Port 0
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x16
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 1, PowerLimit 75.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-

00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
Capabilities: [a0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
Capabilities: [c0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02

00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:19.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=N/C LWO=N/C
Revision ID: 1.02
Capabilities: [a0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
Capabilities: [c0] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=N/C LWO=N/C
Revision ID: 1.02

00:19.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:19.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:19.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

01:06.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage XL
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 7
Region 0: Memory at dd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at dc100000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at c2000000 [disabled] [size=128K]
Capabilities: [5c] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

01:08.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 10)
Subsystem: Intel Corporation EtherExpress PRO/100 S Server Adapter
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: Memory at dc101000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 2400 [size=64]
Region 2: Memory at dc120000 (32-bit, non-prefetchable) [size=128K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-

02:00.0 InfiniBand: Mellanox Technologies MT25204 [InfiniHost III Lx HCA] (rev 20)
Subsystem: Mellanox Technologies MT25204 [InfiniHost III Lx HCA]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at de000000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at de800000 (64-bit, prefetchable) [size=8M]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] Vital Product Data
Capabilities: [90] Message Signalled Interrupts: 64bit+ Queue=0/5 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [84] MSI-X: Enable- Mask- TabSize=32
Vector table: BAR=0 offset=00082000
PBA: BAR=0 offset=00082200
Capabilities: [60] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
Device: Latency L0s <64ns, L1 unlimited
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 8
Link: Latency L0s unlimited, L1 unlimited
Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
Link: Speed 2.5Gb/s, Width x4

18:0a.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=18, secondary=19, subordinate=19, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: df100000-df1fffff
Prefetchable memory behind bridge: 00000000c2100000-00000000c2100000
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [a0] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
Status: Dev=18:0a.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Upstream: Capacity=14 CommitmentLimit=65535
Downstream: Capacity=2 CommitmentLimit=65535
Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration
Capabilities: [c0] HyperTransport: Slave or Primary Interface
!!! Possibly incomplete decoding
Command: BaseUnitID=10 UnitCnt=2 MastHost- DefDir-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config 0: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0
Link Config 1: MLWI=8bit MLWO=8bit LWI=N/C LWO=N/C
Revision ID: 1.02

18:0a.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at df000000 (64-bit, non-prefetchable) [size=4K]

18:0b.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8131 PCI-X Bridge (rev 13) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Bus: primary=18, secondary=1a, subordinate=1a, sec-latency=64
I/O behind bridge: 0000f000-00000fff
Memory behind bridge: df200000-df2fffff
Prefetchable memory behind bridge: 00000000c2200000-00000000c2200000
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
Capabilities: [a0] PCI-X bridge device
Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=100MHz
Status: Dev=18:0b.0 64bit+ 133MHz+ SCD- USC- SCO- SRD-
Upstream: Capacity=14 CommitmentLimit=65535
Downstream: Capacity=2 CommitmentLimit=65535
Capabilities: [b8] HyperTransport: Interrupt Discovery and Configuration

18:0b.1 PIC: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC (rev 01) (prog-if 10 [IO-APIC])
Subsystem: Advanced Micro Devices [AMD] AMD-8131 PCI-X IOAPIC
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at df001000 (64-bit, non-prefetchable) [size=4K]

19:03.0 Fibre Channel: LSI Logic / Symbios Logic FC949X Fibre Channel Adapter (rev 01)
Subsystem: LSI Logic / Symbios Logic Unknown device 50f0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 72 (16000ns min, 2500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at 3000 [disabled] [size=256]
Region 1: Memory at df110000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at df100000 (64-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c2100000 [disabled] [size=1M]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [98] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [68] PCI-X non-bridge device
Command: DPERE- ERO- RBC=2048 OST=16
Status: Dev=19:03.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=16 DMCRS=64 RSCEM- 266MHz- 533MHz-
Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
Vector table: BAR=1 offset=00002000
PBA: BAR=1 offset=00003000

1a:09.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
Subsystem: Broadcom Corporation Unknown device 1644
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 28
Region 0: Memory at df200000 (64-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c2200000 [disabled] [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO- RBC=2048 OST=1
Status: Dev=1a:09.0 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
Address: 9d623b641100491c Data: 3600

1a:09.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5704 Gigabit Ethernet (rev 10)
Subsystem: Broadcom Corporation Unknown device 1644
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 29
Region 0: Memory at df210000 (64-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c2210000 [disabled] [size=64K]
Capabilities: [40] PCI-X non-bridge device
Command: DPERE- ERO- RBC=2048 OST=1
Status: Dev=1a:09.1 64bit+ 133MHz+ SCD- USC- DC=simple DMMRBC=2048 DMOST=1 DMCRS=16 RSCEM- 266MHz- 533MHz-
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Capabilities: [58] Message Signalled Interrupts: 64bit+ Queue=0/3 Enable-
Address: f880bbe1412468c4 Data: 000a



7.6. SCSI information
=====================

Attached devices:
Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: HDS725050KLA360 Rev: K2AO
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi4 Channel: 00 Id: 04 Lun: 01
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 04 Lun: 02
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 04 Lun: 03
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 04 Lun: 04
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 05 Lun: 00
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 05 Lun: 01
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 05 Lun: 02
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 05 Lun: 03
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 05 Lun: 04
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 05 Lun: 05
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 06 Lun: 00
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 06 Lun: 01
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 06 Lun: 02
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 06 Lun: 03
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 06 Lun: 04
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 07 Lun: 00
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 07 Lun: 01
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 07 Lun: 02
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 07 Lun: 03
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 07 Lun: 04
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 08 Lun: 00
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 08 Lun: 01
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 08 Lun: 02
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 08 Lun: 03
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04
Host: scsi4 Channel: 00 Id: 08 Lun: 04
Vendor: IFT Model: A16F-G2430 Rev: 348B
Type: Direct-Access ANSI SCSI revision: 04

----

I am able to make further test or to give further informations.


Regards


M. Schultz


_______________
Manfred Schultz, Astrophysikalisches Institut Potsdam, An der Sternwarte 16
MSchultz@xxxxxx, Tel. +49 331 7499 528, Fax. +49 331 7499 526
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/