[PATCH] [7/35] x86: default to physical mode on hotplug CPU kernels
From: Andi Kleen
Date: Sat Apr 28 2007 - 14:16:01 EST
From: Ingo Molnar <mingo@xxxxxxx>
Default to physical mode on hotplug CPU kernels. Furher simplify and clean up
the APIC initialization code.
Signed-off-by: Ingo Molnar <mingo@xxxxxxx>
Signed-off-by: Andi Kleen <ak@xxxxxxx>
Cc: Suresh Siddha <suresh.b.siddha@xxxxxxxxx>
Cc: Andi Kleen <ak@xxxxxxx>
Cc: "Li, Shaohua" <shaohua.li@xxxxxxxxx>
Cc: "Eric W. Biederman" <ebiederm@xxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
arch/i386/kernel/acpi/boot.c | 2 +-
arch/i386/kernel/mpparse.c | 2 +-
arch/x86_64/kernel/genapic.c | 16 +++-------------
arch/x86_64/kernel/mpparse.c | 2 +-
include/asm-i386/genapic.h | 4 ++--
include/asm-i386/mach-bigsmp/mach_apic.h | 2 +-
include/asm-i386/mach-default/mach_apic.h | 2 +-
include/asm-i386/mach-es7000/mach_apic.h | 2 +-
include/asm-i386/mach-generic/mach_apic.h | 2 +-
include/asm-i386/mach-numaq/mach_apic.h | 2 +-
include/asm-i386/mach-summit/mach_apic.h | 2 +-
include/asm-i386/mach-visws/mach_apic.h | 2 +-
include/asm-x86_64/apic.h | 2 +-
13 files changed, 16 insertions(+), 26 deletions(-)
Index: linux/arch/i386/kernel/acpi/boot.c
===================================================================
--- linux.orig/arch/i386/kernel/acpi/boot.c
+++ linux/arch/i386/kernel/acpi/boot.c
@@ -874,7 +874,7 @@ static void __init acpi_process_madt(voi
acpi_ioapic = 1;
smp_found_config = 1;
- clustered_apic_check();
+ setup_apic_routing();
}
}
if (error == -EINVAL) {
Index: linux/arch/i386/kernel/mpparse.c
===================================================================
--- linux.orig/arch/i386/kernel/mpparse.c
+++ linux/arch/i386/kernel/mpparse.c
@@ -477,7 +477,7 @@ static int __init smp_read_mpc(struct mp
}
++mpc_record;
}
- clustered_apic_check();
+ setup_apic_routing();
if (!num_processors)
printk(KERN_ERR "SMP mptable: no processors registered!\n");
return num_processors;
Index: linux/arch/x86_64/kernel/genapic.c
===================================================================
--- linux.orig/arch/x86_64/kernel/genapic.c
+++ linux/arch/x86_64/kernel/genapic.c
@@ -35,11 +35,8 @@ struct genapic __read_mostly *genapic =
/*
* Check the APIC IDs in bios_cpu_apicid and choose the APIC mode.
*/
-void __init clustered_apic_check(void)
+void __init setup_apic_routing(void)
{
- unsigned int i, max_apic = 0;
- u8 id;
-
#ifdef CONFIG_ACPI
/*
* Quirk: some x86_64 machines can only use physical APIC mode
@@ -49,17 +46,10 @@ void __init clustered_apic_check(void)
if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL))
genapic = &apic_physflat;
+ else
#endif
- for (i = 0; i < NR_CPUS; i++) {
- id = bios_cpu_apicid[i];
- if (id == BAD_APICID)
- continue;
- if (id > max_apic)
- max_apic = id;
- }
-
- if (max_apic < 8)
+ if (cpus_weight(cpu_possible_map) <= 8)
genapic = &apic_flat;
else
genapic = &apic_physflat;
Index: linux/arch/x86_64/kernel/mpparse.c
===================================================================
--- linux.orig/arch/x86_64/kernel/mpparse.c
+++ linux/arch/x86_64/kernel/mpparse.c
@@ -300,7 +300,7 @@ static int __init smp_read_mpc(struct mp
}
}
}
- clustered_apic_check();
+ setup_apic_routing();
if (!num_processors)
printk(KERN_ERR "MPTABLE: no processors registered!\n");
return num_processors;
Index: linux/include/asm-i386/genapic.h
===================================================================
--- linux.orig/include/asm-i386/genapic.h
+++ linux/include/asm-i386/genapic.h
@@ -36,7 +36,7 @@ struct genapic {
void (*init_apic_ldr)(void);
physid_mask_t (*ioapic_phys_id_map)(physid_mask_t map);
- void (*clustered_apic_check)(void);
+ void (*setup_apic_routing)(void);
int (*multi_timer_check)(int apic, int irq);
int (*apicid_to_node)(int logical_apicid);
int (*cpu_to_logical_apicid)(int cpu);
@@ -99,7 +99,7 @@ struct genapic {
APICFUNC(check_apicid_present) \
APICFUNC(init_apic_ldr) \
APICFUNC(ioapic_phys_id_map) \
- APICFUNC(clustered_apic_check) \
+ APICFUNC(setup_apic_routing) \
APICFUNC(multi_timer_check) \
APICFUNC(apicid_to_node) \
APICFUNC(cpu_to_logical_apicid) \
Index: linux/include/asm-i386/mach-bigsmp/mach_apic.h
===================================================================
--- linux.orig/include/asm-i386/mach-bigsmp/mach_apic.h
+++ linux/include/asm-i386/mach-bigsmp/mach_apic.h
@@ -71,7 +71,7 @@ static inline void init_apic_ldr(void)
apic_write_around(APIC_LDR, val);
}
-static inline void clustered_apic_check(void)
+static inline void setup_apic_routing(void)
{
printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
"Physflat", nr_ioapics);
Index: linux/include/asm-i386/mach-default/mach_apic.h
===================================================================
--- linux.orig/include/asm-i386/mach-default/mach_apic.h
+++ linux/include/asm-i386/mach-default/mach_apic.h
@@ -54,7 +54,7 @@ static inline physid_mask_t ioapic_phys_
return phys_map;
}
-static inline void clustered_apic_check(void)
+static inline void setup_apic_routing(void)
{
printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
"Flat", nr_ioapics);
Index: linux/include/asm-i386/mach-es7000/mach_apic.h
===================================================================
--- linux.orig/include/asm-i386/mach-es7000/mach_apic.h
+++ linux/include/asm-i386/mach-es7000/mach_apic.h
@@ -81,7 +81,7 @@ static inline void enable_apic_mode(void
}
extern int apic_version [MAX_APICS];
-static inline void clustered_apic_check(void)
+static inline void setup_apic_routing(void)
{
int apic = bios_cpu_apicid[smp_processor_id()];
printk("Enabling APIC mode: %s. Using %d I/O APICs, target cpus %lx\n",
Index: linux/include/asm-i386/mach-generic/mach_apic.h
===================================================================
--- linux.orig/include/asm-i386/mach-generic/mach_apic.h
+++ linux/include/asm-i386/mach-generic/mach_apic.h
@@ -13,7 +13,7 @@
#define apic_id_registered (genapic->apic_id_registered)
#define init_apic_ldr (genapic->init_apic_ldr)
#define ioapic_phys_id_map (genapic->ioapic_phys_id_map)
-#define clustered_apic_check (genapic->clustered_apic_check)
+#define setup_apic_routing (genapic->setup_apic_routing)
#define multi_timer_check (genapic->multi_timer_check)
#define apicid_to_node (genapic->apicid_to_node)
#define cpu_to_logical_apicid (genapic->cpu_to_logical_apicid)
Index: linux/include/asm-i386/mach-numaq/mach_apic.h
===================================================================
--- linux.orig/include/asm-i386/mach-numaq/mach_apic.h
+++ linux/include/asm-i386/mach-numaq/mach_apic.h
@@ -34,7 +34,7 @@ static inline void init_apic_ldr(void)
/* Already done in NUMA-Q firmware */
}
-static inline void clustered_apic_check(void)
+static inline void setup_apic_routing(void)
{
printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
"NUMA-Q", nr_ioapics);
Index: linux/include/asm-i386/mach-summit/mach_apic.h
===================================================================
--- linux.orig/include/asm-i386/mach-summit/mach_apic.h
+++ linux/include/asm-i386/mach-summit/mach_apic.h
@@ -80,7 +80,7 @@ static inline int apic_id_registered(voi
return 1;
}
-static inline void clustered_apic_check(void)
+static inline void setup_apic_routing(void)
{
printk("Enabling APIC mode: Summit. Using %d I/O APICs\n",
nr_ioapics);
Index: linux/include/asm-i386/mach-visws/mach_apic.h
===================================================================
--- linux.orig/include/asm-i386/mach-visws/mach_apic.h
+++ linux/include/asm-i386/mach-visws/mach_apic.h
@@ -47,7 +47,7 @@ static inline void summit_check(char *oe
{
}
-static inline void clustered_apic_check(void)
+static inline void setup_apic_routing(void)
{
}
Index: linux/include/asm-x86_64/apic.h
===================================================================
--- linux.orig/include/asm-x86_64/apic.h
+++ linux/include/asm-x86_64/apic.h
@@ -83,7 +83,7 @@ extern void setup_secondary_APIC_clock (
extern int APIC_init_uniprocessor (void);
extern void disable_APIC_timer(void);
extern void enable_APIC_timer(void);
-extern void clustered_apic_check(void);
+extern void setup_apic_routing(void);
extern void setup_APIC_extened_lvt(unsigned char lvt_off, unsigned char vector,
unsigned char msg_type, unsigned char mask);
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/