[PATCH 10/36] Use menuconfig objects II - Infiniband

[Jan Engelhardt]

Change Kconfig objects from "menu, config" into "menuconfig" so
that the user can disable the whole feature without having to
enter the menu first.

Signed-off-by: Jan Engelhardt <jengelh@xxxxxx>

---
 drivers/infiniband/Kconfig             |   14 ++++++--------
 drivers/infiniband/hw/amso1100/Kconfig |    2 +-
 drivers/infiniband/hw/cxgb3/Kconfig    |    2 +-
 drivers/infiniband/hw/ehca/Kconfig     |    2 +-
 drivers/infiniband/hw/ipath/Kconfig    |    2 +-
 drivers/infiniband/hw/mlx4/Kconfig     |    1 -
 drivers/infiniband/hw/mthca/Kconfig    |    2 +-
 drivers/infiniband/ulp/ipoib/Kconfig   |    2 +-
 drivers/infiniband/ulp/iser/Kconfig    |    2 +-
 drivers/infiniband/ulp/srp/Kconfig     |    2 +-
 10 files changed, 14 insertions(+), 17 deletions(-)

--- linux-2.6.21-mm_20070428.orig/drivers/infiniband/Kconfig
+++ linux-2.6.21-mm_20070428/drivers/infiniband/Kconfig
@@ -1,16 +1,15 @@
-menu "InfiniBand support"
-
-config INFINIBAND
-	depends on PCI || BROKEN
+menuconfig INFINIBAND
 	tristate "InfiniBand support"
+	depends on PCI || BROKEN
 	---help---
 	  Core support for InfiniBand (IB).  Make sure to also select
 	  any protocols you wish to use as well as drivers for your
 	  InfiniBand hardware.
 
+if INFINIBAND
+
 config INFINIBAND_USER_MAD
 	tristate "InfiniBand userspace MAD support"
-	depends on INFINIBAND
 	---help---
 	  Userspace InfiniBand Management Datagram (MAD) support.  This
 	  is the kernel side of the userspace MAD support, which allows
@@ -19,7 +18,6 @@ config INFINIBAND_USER_MAD
 
 config INFINIBAND_USER_ACCESS
 	tristate "InfiniBand userspace access (verbs and CM)"
-	depends on INFINIBAND
 	---help---
 	  Userspace InfiniBand access support.  This enables the
 	  kernel side of userspace verbs and the userspace
@@ -36,7 +34,7 @@ config INFINIBAND_USER_MEM
 
 config INFINIBAND_ADDR_TRANS
 	bool
-	depends on INFINIBAND && INET
+	depends on INET
 	default y
 
 source "drivers/infiniband/hw/mthca/Kconfig"
@@ -53,4 +51,4 @@ source "drivers/infiniband/ulp/srp/Kconf
 
 source "drivers/infiniband/ulp/iser/Kconfig"
 
-endmenu
+endif # INFINIBAND
--- linux-2.6.21-mm_20070428.orig/drivers/infiniband/hw/amso1100/Kconfig
+++ linux-2.6.21-mm_20070428/drivers/infiniband/hw/amso1100/Kconfig
@@ -1,6 +1,6 @@
 config INFINIBAND_AMSO1100
 	tristate "Ammasso 1100 HCA support"
-	depends on PCI && INET && INFINIBAND
+	depends on PCI && INET
 	---help---
 	  This is a low-level driver for the Ammasso 1100 host
 	  channel adapter (HCA).
--- linux-2.6.21-mm_20070428.orig/drivers/infiniband/hw/cxgb3/Kconfig
+++ linux-2.6.21-mm_20070428/drivers/infiniband/hw/cxgb3/Kconfig
@@ -1,6 +1,6 @@
 config INFINIBAND_CXGB3
 	tristate "Chelsio RDMA Driver"
-	depends on CHELSIO_T3 && INFINIBAND && INET
+	depends on CHELSIO_T3 && INET
 	select GENERIC_ALLOCATOR
 	---help---
 	  This is an iWARP/RDMA driver for the Chelsio T3 1GbE and
--- linux-2.6.21-mm_20070428.orig/drivers/infiniband/hw/ehca/Kconfig
+++ linux-2.6.21-mm_20070428/drivers/infiniband/hw/ehca/Kconfig
@@ -1,6 +1,6 @@
 config INFINIBAND_EHCA
 	tristate "eHCA support"
-	depends on IBMEBUS && INFINIBAND
+	depends on IBMEBUS
 	---help---
 	This driver supports the IBM pSeries eHCA InfiniBand adapter.
 
--- linux-2.6.21-mm_20070428.orig/drivers/infiniband/hw/ipath/Kconfig
+++ linux-2.6.21-mm_20070428/drivers/infiniband/hw/ipath/Kconfig
@@ -1,6 +1,6 @@
 config INFINIBAND_IPATH
 	tristate "QLogic InfiniPath Driver"
-	depends on (PCI_MSI || HT_IRQ) && 64BIT && INFINIBAND && NET
+	depends on (PCI_MSI || HT_IRQ) && 64BIT && NET
 	---help---
 	This is a driver for QLogic InfiniPath host channel adapters,
 	including InfiniBand verbs support.  This driver allows these
--- linux-2.6.21-mm_20070428.orig/drivers/infiniband/hw/mlx4/Kconfig
+++ linux-2.6.21-mm_20070428/drivers/infiniband/hw/mlx4/Kconfig
@@ -1,6 +1,5 @@
 config MLX4_INFINIBAND
 	tristate "Mellanox ConnectX HCA support"
-	depends on INFINIBAND
 	select MLX4_CORE
 	---help---
 	  This driver provides low-level InfiniBand support for
--- linux-2.6.21-mm_20070428.orig/drivers/infiniband/hw/mthca/Kconfig
+++ linux-2.6.21-mm_20070428/drivers/infiniband/hw/mthca/Kconfig
@@ -1,6 +1,6 @@
 config INFINIBAND_MTHCA
 	tristate "Mellanox HCA support"
-	depends on PCI && INFINIBAND
+	depends on PCI
 	---help---
 	  This is a low-level driver for Mellanox InfiniHost host
 	  channel adapters (HCAs), including the MT23108 PCI-X HCA
--- linux-2.6.21-mm_20070428.orig/drivers/infiniband/ulp/ipoib/Kconfig
+++ linux-2.6.21-mm_20070428/drivers/infiniband/ulp/ipoib/Kconfig
@@ -1,6 +1,6 @@
 config INFINIBAND_IPOIB
 	tristate "IP-over-InfiniBand"
-	depends on INFINIBAND && NETDEVICES && INET && (IPV6 || IPV6=n)
+	depends on NETDEVICES && INET && (IPV6 || IPV6=n)
 	---help---
 	  Support for the IP-over-InfiniBand protocol (IPoIB). This
 	  transports IP packets over InfiniBand so you can use your IB
--- linux-2.6.21-mm_20070428.orig/drivers/infiniband/ulp/iser/Kconfig
+++ linux-2.6.21-mm_20070428/drivers/infiniband/ulp/iser/Kconfig
@@ -1,6 +1,6 @@
 config INFINIBAND_ISER
 	tristate "iSCSI Extensions for RDMA (iSER)"
-	depends on INFINIBAND && SCSI && INET
+	depends on SCSI && INET
 	select SCSI_ISCSI_ATTRS
 	---help---
 	  Support for the iSCSI Extensions for RDMA (iSER) Protocol
--- linux-2.6.21-mm_20070428.orig/drivers/infiniband/ulp/srp/Kconfig
+++ linux-2.6.21-mm_20070428/drivers/infiniband/ulp/srp/Kconfig
@@ -1,6 +1,6 @@
 config INFINIBAND_SRP
 	tristate "InfiniBand SCSI RDMA Protocol"
-	depends on INFINIBAND && SCSI
+	depends on SCSI
 	---help---
 	  Support for the SCSI RDMA Protocol over InfiniBand.  This
 	  allows you to access storage devices that speak SRP over
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/