Re: More JMicron troubles with 2.6.21

[Ioan Ionita]

On 5/2/07, Alan Cox <alan@xxxxxxxxxxxxxxxxxxx> wrote:
> This is almost certainly a problem outside of the IDE handling in that
> case. The jmicron controllers are smart, there is basically no code to
> the IDE driver to go wrong (especially in the case of using the old IDE
> for the PATA port where you basically use zero code that hasn't been
> tested for years).
Could this be a hardware problem then? The CD-ROM is recognized by
BIOS and I'm able to boot bootable CDs fine.
Could it be a setting in BIOS? I did try to switch from Enhanced to
Compatible mode, but problem persists.
With the ide driver, the device is recognized, but when I attempt to
mount it, il times out, gets reset and my machine locks up at times.
> Do you get the odd timeout or continuous timeouts ?
With the pata_jmicron, the device is not recognized. I get the
timeouts only during the probing during the boot phase.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/