Re: [linux-usb-devel] [BUG] usb/core/hub.c loops forever on resumefrom ram due to bluetooth

[Alan Stern]

On Thu, 3 May 2007, Mark Lord wrote:

> > If the code never gets stuck in a loop, then there's no need to check 
> > whether the loop is unbounded!  :-)
> 
> Yes, except here we know it does actually get stuck in a loop,
> and having unbounded loops in device-driver code is a known baddy.
> 
> One cannot predict perfectly exactly how devices will fail,
> but one can program defensively against them with simple precautions
> like limiting list traversals and the like.  :)
> 
> Sure, Marcel may eventually look at the bluetooth code and fix it
> to not get confused, but some other USB device may then show up
> in the future with similar issues.

I'd agree, except that the problem isn't in the bluetooth code.  And it
probably doesn't have anything in particular to do with the fact that this
is a bluetooth device; the TT code gets used with USB hubs only.  More
accurately, the code helps manage the TT embedded in a high-speed USB hub,
allowing the hub to communicate with a full- or low-speed USB device
plugged into it.

>  The messages are still there
> so we'll know about any future failure, but it won't just silently
> crash the machine on resume this way.
> 
> Remember, resume is a very tough operation to debug at the best
> of times, so adding some harmless robustness to the more troublesome
> drives is a very Good Thing(tm) here.

Alan Stern

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/