[PATCH 4/5] i386: i8253 clockevent shutdown and unused using pit

[Chris Wright]

Disable by programming pit directly when performing CLOCK_EVT_MODE_UNUSED
or CLOCK_EVT_MODE_SHUTDOWN transitions.  (A variant) tested successfully
by Joachim Deguara on a Geode that exhibited BZ 8027 behaviour (with
bad bogomips).

Signed-off-by: Chris Wright <chrisw@xxxxxxxxxxxx>
Cc: Joachim Deguara <joachim.deguara@xxxxxxx>
---
 arch/i386/kernel/i8253.c |   25 ++++---------------------
 1 file changed, 4 insertions(+), 21 deletions(-)

--- tglx.orig/arch/i386/kernel/i8253.c
+++ tglx/arch/i386/kernel/i8253.c
@@ -29,24 +29,6 @@ EXPORT_SYMBOL(i8253_lock);
  */
 struct clock_event_device *global_clock_event;
 
-/* Status of the PIT interrupt */
-static int pit_irq_disabled;
-
-/*
- * Control pit interrupt enable / disable
- */
-static void pit_control_irq(int disable)
-{
-	if (pit_irq_disabled == disable)
-		return;
-
-	pit_irq_disabled = disable;
-	if (disable)
-		disable_irq(0);
-	else
-		enable_irq(0);
-}
-
 /*
  * Initialize the PIT timer.
  *
@@ -65,17 +47,18 @@ static void init_pit_timer(enum clock_ev
 		outb_p(0x34, PIT_MODE);
 		outb_p(LATCH & 0xff , PIT_CH0);	/* LSB */
 		outb(LATCH >> 8 , PIT_CH0);	/* MSB */
-		pit_control_irq(0);
 		break;
 
 	case CLOCK_EVT_MODE_SHUTDOWN:
 	case CLOCK_EVT_MODE_UNUSED:
-		pit_control_irq(1);
+		outb_p(0x30, PIT_MODE);
+		outb_p(0, PIT_CH0);	/* LSB */
+		outb_p(0, PIT_CH0);	/* MSB */
 		break;
+
 	case CLOCK_EVT_MODE_ONESHOT:
 		/* One shot setup */
 		outb_p(0x38, PIT_MODE);
-		pit_control_irq(0);
 		break;
 
 	case CLOCK_EVT_MODE_RESUME:
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/