Re: IT821x: no DMA since 2.6.21

[Thomas Kuther]

--Sig_XtfHJqE9jqSk2ze5SUwpe5U
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: quoted-printable

On Di, 15.05.07 12:53 Thomas Kuther wrote:

> Hi!
>=20
> Since 2.6.21 I have a problem with the it821x driver on my ITE 8212
> controller.
> Now I saw some updates to it821x in 2.6.22-rc1 and gave that a try,
> but the problem persists.
>=20

Back on 2.6.20 - here is some output from the working driver.

There is actually no difference in dmesg:
-------------------------8<---------------------------
IT8212: IDE controller at PCI slot 0000:00:09.0
ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 18
IT8212: chipset revision 17
it821x: controller in smart mode.
IT8212: 100% native mode on irq 18
    ide2: BM-DMA at 0xdc00-0xdc07, BIOS settings: hde:pio, hdf:pio
    ide3: BM-DMA at 0xdc08-0xdc0f, BIOS settings: hdg:pio, hdh:pio
Probing IDE interface ide2...
hde: SAMSUNG SP2514N, ATA DISK drive
hdf: Maxtor 6Y120L0, ATA DISK drive
hde: Performing identify fixups.
hdf: Performing identify fixups.
ide2 at 0xec00-0xec07,0xe802 on irq 18
hde: max request size: 128KiB
hde: 488397168 sectors (250059 MB) w/8192KiB Cache, CHS=3D30401/255/63,
BUG DMA OFF=20
hde:hde: recal_intr: status=3D0x51 { DriveReady SeekComplete Error }=20
hde:recal_intr: error=3D0x04 { DriveStatusError } ide: failed opcode was:
unknown
 hde1
hdf: max request size: 128KiB
hdf: 240121728 sectors (122942 MB) w/2048KiB Cache, CHS=3D65535/16/63,
BUG DMA OFF=20
hdf:hdf: recal_intr: status=3D0x51 { DriveReady SeekComplete Error }=20
hdf:recal_intr: error=3D0x04 { DriveStatusError } ide: failed opcode was:
unknown hdf1
------------------------------>8-------------------------------

But hdparm works:
---------------
# hdparm -d1 /dev/hde
/dev/hde:
 setting using_dma to 1 (on)
 using_dma     =3D  1 (on)
----------------
# hdparm -tT /dev/hde

/dev/hde:
 Timing cached reads:   372 MB in  2.01 seconds =3D 185.17 MB/sec
HDIO_DRIVE_CMD(null) (wait for flush complete) failed: Input/output
error=20
 Timing buffered disk reads:  124 MB in  3.01 seconds =3D  41.18 MB/sec
HDIO_DRIVE_CMD(null) (wait for flush complete) failed: Input/output
error
----------------
hdparm version is 7.3.
DMA is enabled in the controller's BIOS, of course.

Hope this helps a bit.

Thanks,
Thomas

--Sig_XtfHJqE9jqSk2ze5SUwpe5U
Content-Type: application/pgp-signature; name=signature.asc
Content-Disposition: attachment; filename=signature.asc

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.3 (GNU/Linux)

iD8DBQFGSZj8MQFfAqZTGfwRAr15AJ4xXNNO5jeDdZFf+FM8JPgNkB2rRwCgj1O/
2G9zGW+A5QM+PE5owvqAtnU=
=bV1V
-----END PGP SIGNATURE-----

--Sig_XtfHJqE9jqSk2ze5SUwpe5U--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/