Re: [PATCH] libata: limit post SRST nsect/lbal wait to ~100ms

[Jeff Garzik]

Tejun Heo wrote:
> After SRST, libata used to wait for nsect/lbal to be set to 1/1 for
> the slave device.  However, some ATAPI devices don't set nsect/lbal
> after SRST and the wait itself isn't too useful as we're gonna wait
> for !BSY right after that anyway.
>
> Before reset-seq update, nsect/lbal wait failure used to be ignored
> and caused 30sec delay during detection.  After reset-seq, all
> timeouts are considered error conditions making libata fail to detect
> such ATAPI devices.
>
> This patch limits nsect/lbal wait to around 100ms.  This should give
> acceptable behavior to such ATAPI devices while not disturbing the
> heavily used code path too much.
>
> Signed-off-by: Tejun Heo <htejun@xxxxxxxxx>
> ---
> Okay, here it is.  Sorry for the delay.
>
>  drivers/ata/libata-core.c |   32 +++++++++++++++++++-------------
>  1 file changed, 19 insertions(+), 13 deletions(-)

Thanks.  Maybe Gregor can confirm this fixes his problem?

I'll ACK and push upstream then...


-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/