Re: v2.6.21.4-rt11

[Paul E. McKenney]

On Mon, Jun 11, 2007 at 01:44:27PM -0700, Paul E. McKenney wrote:
> On Mon, Jun 11, 2007 at 10:18:06AM -0700, Paul E. McKenney wrote:
> > On Mon, Jun 11, 2007 at 08:55:27AM -0700, Paul E. McKenney wrote:
> > > On Mon, Jun 11, 2007 at 05:38:55PM +0200, Ingo Molnar wrote:
> > > > 
> > > > * Paul E. McKenney <paulmck@xxxxxxxxxxxxxxxxxx> wrote:
> > > > 
> > > > > > hm, what affinity do they start out with? Could they all be pinned 
> > > > > > to CPU#0 by default?
> > > > > 
> > > > > They start off with affinity masks of 0xf on a 4-CPU system.  I would 
> > > > > expect them to load-balance across the four CPUs, but they stay all on 
> > > > > the same CPU until long after I lose patience (many minutes).
> > > > 
> > > > ugh. Would be nice to figure out why this happens. I enabled rcutorture 
> > > > on a dual-core CPU and all the threads are spread evenly.
> > > 
> > > Here is the /proc/cpuinfo in case this helps.  I am starting up a test
> > > on a dual-core CPU to see if that works better.
> > 
> > And this quickly load-balanced to put a pair of readers on each CPU.
> > Later, it moved one of the readers so that it is now running with
> > one reader on one of the CPUs, and the remaining three readers on the
> > other CPU.
> > 
> > Argh...  this is with 2.6.21-rt1...  Need to reboot with 2.6.21.4-rt12...
> 
> OK, here are a couple of snapshots from "top" on a two-way system.
> It seems to cycle back and forth between these two states.

And on the 4-CPU box:

  PID USER      PR  NI  VIRT  RES  SHR S %CPU %MEM    TIME+  COMMAND           
 3112 root      39  19     0    0    0 R 11.6  0.0   0:44.34 rcu_torture_rea   
 3114 root      39  19     0    0    0 R 11.6  0.0   0:44.34 rcu_torture_rea   
 3115 root      39  19     0    0    0 R 11.6  0.0   0:44.34 rcu_torture_rea   
 3116 root      39  19     0    0    0 R 11.6  0.0   0:44.34 rcu_torture_rea   
 3109 root      39  19     0    0    0 R 11.3  0.0   0:44.33 rcu_torture_rea   
 3110 root      39  19     0    0    0 R 11.3  0.0   0:44.33 rcu_torture_rea   
 3111 root      39  19     0    0    0 R 11.3  0.0   0:44.34 rcu_torture_rea   
 3113 root      39  19     0    0    0 R 11.3  0.0   0:44.34 rcu_torture_rea   
 3108 root      39  19     0    0    0 D  6.0  0.0   0:24.35 rcu_torture_wri   

All are on CPU zero:

elm3b6:~# cat /proc/3109/stat | awk '{print $(NF-3)}'
0
elm3b6:~# cat /proc/3110/stat | awk '{print $(NF-3)}'
0
elm3b6:~# cat /proc/3111/stat | awk '{print $(NF-3)}'
0
elm3b6:~# cat /proc/3112/stat | awk '{print $(NF-3)}'
0
elm3b6:~# cat /proc/3113/stat | awk '{print $(NF-3)}'
0
elm3b6:~# cat /proc/3114/stat | awk '{print $(NF-3)}'
0
elm3b6:~# cat /proc/3115/stat | awk '{print $(NF-3)}'
0
elm3b6:~# cat /proc/3116/stat | awk '{print $(NF-3)}'
0
elm3b6:~# cat /proc/3108/stat | awk '{print $(NF-3)}'
0

All have their affinity masks at f (allowing them to run on all CPUs):

elm3b6:~# taskset -p 3109
pid 3109's current affinity mask: f
elm3b6:~# taskset -p 3110
pid 3110's current affinity mask: f
elm3b6:~# taskset -p 3111
pid 3111's current affinity mask: f
elm3b6:~# taskset -p 3112
pid 3112's current affinity mask: f
elm3b6:~# taskset -p 3113
pid 3113's current affinity mask: f
elm3b6:~# taskset -p 3114
pid 3114's current affinity mask: f
elm3b6:~# taskset -p 3115
pid 3115's current affinity mask: f
elm3b6:~# taskset -p 3116
pid 3116's current affinity mask: f
elm3b6:~# taskset -p 3108
pid 3108's current affinity mask: f

Not a biggie for me, since I can easily do the taskset commands to
force the processes to spread out, but I am worried that casual users
of rcutorture won't know to do this -- thus not really torturing RCU.
It would not be hard to modify rcutorture to affinity the tasks so as
to spread them, but this seems a bit ugly.

						Thanx, Paul
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/