WARNING: at drivers/usb/core/urb.c:293 usb_submit_urb() [Was: 2.6.22-rc4-mm2]
From: Jiri Slaby
Date: Wed Jun 13 2007 - 04:33:48 EST
Andrew Morton napsal(a):
> ftp://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.22-rc4/2.6.22-rc4-mm2/
Hi,
after plugging my camera in, I get this:
usb 1-1: new full speed USB device using uhci_hcd and address 2
usb 1-1: new device found, idVendor=07b4, idProduct=0105
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: C765UZ
usb 1-1: Manufacturer: OLYMPUS
usb 1-1: SerialNumber: 000375531837
usb 1-1: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi7 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
WARNING: at /home/l/latest/xxx/drivers/usb/core/urb.c:293 usb_submit_urb()
[<c010516a>] dump_trace+0x1d8/0x207
[<c01051b3>] show_trace_log_lvl+0x1a/0x30
[<c0105db9>] show_trace+0x12/0x14
[<c0105dd1>] dump_stack+0x16/0x18
[<c0284034>] usb_submit_urb+0x1ea/0x200
[<c02857fe>] usb_sg_wait+0xba/0x14e
[<f8985098>] usb_stor_bulk_transfer_sg+0x99/0xe3 [usb_storage]
[<f89854cc>] usb_stor_Bulk_transport+0x127/0x277 [usb_storage]
[<f8985637>] usb_stor_invoke_transport+0x1b/0x2f4 [usb_storage]
[<f89848b9>] usb_stor_transparent_scsi_command+0x8/0xa [usb_storage]
[<f8986354>] usb_stor_control_thread+0x130/0x195 [usb_storage]
[<c0136d07>] kthread+0x37/0x59
[<c0104bfb>] kernel_thread_helper+0x7/0x1c
=======================
It's not usable, some threads end up in D state. Relevant part of sysrq-t:
scsi_eh_7 D 0080027D 0 23842 2 (L-TLB)
c2e52f34 00000046 45ad4b85 0080027d c2e52f1c 00000000 c3e88230 45ad46cf
0080027d c012262a c3e88230 c3e883b8 c180b980 486cfe61 0000027d c037487f
c2e52f74 00000046 d560826b 0080027a c011c00f c2cecac0 c0545080 c0545080
Call Trace:
[<c0374f8d>] wait_for_completion+0x87/0xbc
[<f898462e>] command_abort+0x58/0x74 [usb_storage]
[<c0263be3>] __scsi_try_to_abort_cmd+0x1c/0x1e
[<c0264f10>] scsi_error_handler+0x241/0x2bf
[<c0136d07>] kthread+0x37/0x59
[<c0104bfb>] kernel_thread_helper+0x7/0x1c
=======================
usb-storage D 0080027B 0 23843 2 (L-TLB)
c2f76e94 00000046 fecf46f3 0080027b c2f76e7c 00000000 00000000 fecf4091
0080027b c012262a c3e89870 c3e899f8 c180b980 018ef9cf 0000027c c1ce9c00
c2f76e60 c0125fae c0408a64 c2f76e6c c2f76e6c c1f98e40 c0545080 c0545080
Call Trace:
[<c0374f8d>] wait_for_completion+0x87/0xbc
[<c028585a>] usb_sg_wait+0x116/0x14e
[<f8985098>] usb_stor_bulk_transfer_sg+0x99/0xe3 [usb_storage]
[<f89854cc>] usb_stor_Bulk_transport+0x127/0x277 [usb_storage]
[<f8985637>] usb_stor_invoke_transport+0x1b/0x2f4 [usb_storage]
[<f89848b9>] usb_stor_transparent_scsi_command+0x8/0xa [usb_storage]
[<f8986354>] usb_stor_control_thread+0x130/0x195 [usb_storage]
[<c0136d07>] kthread+0x37/0x59
[<c0104bfb>] kernel_thread_helper+0x7/0x1c
=======================
usb-stor-scan D 0080027B 0 23844 2 (L-TLB)
c46fecbc 00000046 febe1f98 0080027b c46feca4 00000000 c46fec68 febe17da
0080027b c012262a c4345260 c43453e8 c180b980 017dd274 0000027c c43ec000
c46fec7c c01e2964 c46fec84 c02541f8 c46fecb0 c1f98e40 c0545080 c0545080
Call Trace:
[<c0374f8d>] wait_for_completion+0x87/0xbc
[<c01da63d>] blk_execute_rq+0x5a/0x94
[<c0266479>] scsi_execute+0xc3/0xd7
[<c02664f3>] scsi_execute_req+0x66/0xc4
[<c026762f>] scsi_probe_and_add_lun+0x19b/0x891
[<c0268265>] __scsi_scan_target+0xd3/0x59f
[<c02687a0>] scsi_scan_channel+0x6f/0x84
[<c0268818>] scsi_scan_host_selected+0x63/0xd5
[<c02688f5>] do_scsi_scan_host+0x6b/0x6d
[<c026897e>] scsi_scan_host+0x87/0x153
[<f8986416>] usb_stor_scan_thread+0x5d/0x17b [usb_storage]
[<c0136d07>] kthread+0x37/0x59
[<c0104bfb>] kernel_thread_helper+0x7/0x1c
=======================
Are you aware of such problems? Any other info needed?
thanks,
--
http://www.fi.muni.cz/~xslaby/ Jiri Slaby
faculty of informatics, masaryk university, brno, cz
e-mail: jirislaby gmail com, gpg pubkey fingerprint:
B674 9967 0407 CE62 ACC8 22A0 32CC 55C3 39D4 7A7E
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/