[RFC][PATCH -mm take5 2/7] support multiple logging

[Keiichi KII]

From: Keiichi KII <k-keiichi@xxxxxxxxxxxxx>

This patch contains the following changes for supporting multiple logging
 agents.

1. extend netconsole to multiple netpolls
   To send kernel messages to multiple logging agents, extend netcosnole
    to be able to use multiple netpolls. Each netpoll sends kernel messages
    to its own logging agent.

2. change config parameter format
   We change config parameter format from single configuration to multiple 
   configurations separated by ';'.

   ex) sending kernel messages to destination1 and destination2 using eth0.
    modprobe netconsole \
            netconsole="@/eth0,@[destination1]/;@/eth0,@[destination2]/"

3. introduce CONFIG_NETCONSOLE_DYNCON config to change between 
   existing netconsole and netconsole applying the above function.

Signed-off-by: Keiichi KII <k-keiichi@xxxxxxxxxxxxx>
Signed-off-by: Takayoshi Kochi <t-kochi@xxxxxxxxxxxxx>
---
Index: mm/drivers/net/netconsole.c
===================================================================
--- mm.orig/drivers/net/netconsole.c
+++ mm/drivers/net/netconsole.c
@@ -61,21 +61,104 @@ static struct netpoll np = {
 	.remote_port = 6666,
 	.remote_mac = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff},
 };
-static int configured = 0;
 
 #define MAX_PRINT_CHUNK 1000
 
+#ifdef CONFIG_NETCONSOLE_DYNCON
+struct netconsole_target {
+	struct list_head list;
+	int id;
+	struct netpoll np;
+};
+
+static LIST_HEAD(target_list);
+static DEFINE_SPINLOCK(target_list_lock);
+
+static void remove_target(struct netconsole_target *nt)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&target_list_lock, flags);
+	list_del(&nt->list);
+	if (list_empty(&target_list))
+		netpoll_cleanup(&nt->np);
+	spin_unlock_irqrestore(&target_list_lock, flags);
+	kfree(nt);
+}
+
+static int add_target(char* target_config)
+{
+	int retval = 0;
+	unsigned long flags;
+	static atomic_t target_count = ATOMIC_INIT(0);
+	struct netconsole_target *new_target;
+
+	new_target = kzalloc(sizeof(*new_target), GFP_KERNEL);
+	if (!new_target) {
+		printk(KERN_ERR "netconsole: kmalloc() failed!\n");
+		retval = -ENOMEM;
+		goto out;
+	}
+
+	new_target->np = np;
+	if (netpoll_parse_options(&new_target->np, target_config)) {
+		printk(KERN_ERR "netconsole: can't parse config:%s\n",
+		       target_config);
+		kfree(new_target);
+		retval = -EINVAL;
+		goto out;
+	}
+	if (netpoll_setup(&new_target->np)) {
+		printk(KERN_ERR "netconsole: can't setup netpoll:%s\n",
+		       target_config);
+		kfree(new_target);
+		retval = -EINVAL;
+		goto out;
+	}
+
+	new_target->id = atomic_inc_return(&target_count);
+
+	printk(KERN_INFO "netconsole: add target: "
+	       "remote ip_addr=%d.%d.%d.%d remote port=%d\n",
+	       HIPQUAD(new_target->np.remote_ip), new_target->np.remote_port);
+
+	spin_lock_irqsave(&target_list_lock, flags);
+	list_add(&new_target->list, &target_list);
+	spin_unlock_irqrestore(&target_list_lock, flags);
+
+ out:
+	return retval;
+}
+#endif /* CONFIG_NETCONSOLE_DYNCON */
+
 static void write_msg(struct console *con, const char *msg, unsigned int len)
 {
 	int frag, left;
 	unsigned long flags;
+#ifdef CONFIG_NETCONSOLE_DYNCON
+	struct netconsole_target *target;
+
+	if (list_empty(&target_list))
+		return;
+
+	spin_lock_irqsave(&target_list_lock, flags);
 
+	for (left = len; left; ) {
+		frag = min(left, MAX_PRINT_CHUNK);
+		list_for_each_entry(target, &target_list, list)
+			netpoll_send_udp(&target->np, msg, frag);
+		msg += frag;
+		left -= frag;
+	}
+
+	spin_unlock_irqrestore(&target_list_lock, flags);
+#else
 	if (!np.dev)
 		return;
 
 	local_irq_save(flags);
 
-	for(left = len; left; ) {
+	for (left = len; left; ) {
 		frag = min(left, MAX_PRINT_CHUNK);
 		netpoll_send_udp(&np, msg, frag);
 		msg += frag;
@@ -83,6 +166,7 @@ static void write_msg(struct console *co
 	}
 
 	local_irq_restore(flags);
+#endif /* CONFIG_NETCONSOLE_DYNCON */
 }
 
 static struct console netconsole = {
@@ -91,40 +175,59 @@ static struct console netconsole = {
 	.write = write_msg
 };
 
+#ifndef MODULE
 static int __init option_setup(char *opt)
 {
-	configured = !netpoll_parse_options(&np, opt);
+	strncpy(config, opt, 256);
 	return 1;
 }
 
 __setup("netconsole=", option_setup);
+#endif
 
-static int __init init_netconsole(void)
+static void cleanup_netconsole(void)
 {
-	int err;
+#ifdef CONFIG_NETCONSOLE_DYNCON
+	struct netconsole_target *nt, *tmp;
 
-	if(strlen(config))
-		option_setup(config);
+	unregister_console(&netconsole);
+	list_for_each_entry_safe(nt, tmp, &target_list, list)
+		remove_target(nt);
+#else
+	unregister_console(&netconsole);
+	netpoll_cleanup(&np);
+#endif /* CONFIG_NETCONSOLE_DYNCON */
+}
 
-	if(!configured) {
-		printk("netconsole: not configured, aborting\n");
+static int __init init_netconsole(void)
+{
+	char *tmp = config;
+#ifdef CONFIG_NETCONSOLE_DYNCON
+	char *p;
+
+	register_console(&netconsole);
+	if (!strlen(config)) {
+		printk(KERN_ERR "netconsole: not configured\n");
 		return 0;
 	}
-
-	err = netpoll_setup(&np);
-	if (err)
-		return err;
-
+	while ((p = strsep(&tmp, ";")) != NULL)
+		if (add_target(p)) {
+			printk(KERN_ERR
+			       "netconsole: can't add target to netconsole\n");
+			cleanup_netconsole();
+			return -EINVAL;
+		}
+#else
+	if (!strlen(config) ||
+	    netpoll_parse_options(&np, tmp) || netpoll_setup(&np)) {
+		printk(KERN_ERR "netconsole: can't parse config:%s\n", tmp);
+		return -EINVAL;
+	}
 	register_console(&netconsole);
+#endif /* CONFIG_NETCONSOLE_DYNCON */
 	printk(KERN_INFO "netconsole: network logging started\n");
 	return 0;
 }
 
-static void cleanup_netconsole(void)
-{
-	unregister_console(&netconsole);
-	netpoll_cleanup(&np);
-}
-
 module_init(init_netconsole);
 module_exit(cleanup_netconsole);
Index: mm/drivers/net/Kconfig
===================================================================
--- mm.orig/drivers/net/Kconfig
+++ mm/drivers/net/Kconfig
@@ -3019,6 +3019,16 @@ config NETCONSOLE
 	If you want to log kernel messages over the network, enable this.
 	See <file:Documentation/networking/netconsole.txt> for details.
 
+config NETCONSOLE_DYNCON
+	default y
+	bool "Support for multiple logging and UI for netconsole"
+	depends on NETCONSOLE
+	---help---
+	  This option enables multiple logging and changing dynamically
+	  configurations (e.g. IP adderss, port number and so on)
+	  by using sysfs and ioctl.
+	  See <file:Documentation/networking/netconsole.txt> for details.
+
 config NETPOLL
 	def_bool NETCONSOLE
 

-- 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/