Re: [PATCH] i2c-gpio: Add support for new-style clients

[Atsushi Nemoto]

On Thu, 14 Jun 2007 08:24:17 +0200, Jean Delvare <khali@xxxxxxxxxxxx> wrote:
> > +	if (pdev->id == -1)
> > +		ret = i2c_bit_add_bus(adap);
> > +	else
> > +		ret = i2c_bit_add_numbered_bus(adap);
> >  	if (ret)
> >  		goto err_add_bus;
> >  
> 
> This isn't sufficient. Before you call i2c_bit_add_numbered_bus(adap),
> you are supposed to set adap->nr to the desired i2c adapter number.

Oh, indeed.  That worked for me just I only used bus number 0.
Here is a revised patch.


Subject: [PATCH] i2c-gpio: Add support for new-style clients (take 2)

Use i2c_bit_add_numbered_bus() if platform_device id specified, so
that the i2c-gpio adapter works well with new-style pre-declared
devices.

Signed-off-by: Atsushi Nemoto <anemo@xxxxxxxxxxxxx>
---
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index a7dd546..88c5735 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -142,7 +142,12 @@ static int __init i2c_gpio_probe(struct platform_device *pdev)
 	adap->algo_data = bit_data;
 	adap->dev.parent = &pdev->dev;
 
-	ret = i2c_bit_add_bus(adap);
+	if (pdev->id == -1)
+		ret = i2c_bit_add_bus(adap);
+	else {
+		adap->nr = pdev->id;
+		ret = i2c_bit_add_numbered_bus(adap);
+	}
 	if (ret)
 		goto err_add_bus;
 
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/