Re: [PATCH] atmel_serial: Fix break handling

[Ivan Kuten]

On Mon, 18 Jun 2007 11:33:54 +0100
Russell King wrote:

> On Mon, Jun 18, 2007 at 01:21:21PM +0300, Ivan Kuten wrote:
> > Hi Haavard,
> > 
> > I tried /dev/ttyAT3, break appeared but not the way I expected, after:
> > stty -F /dev/ttyAT3 brkint I get:
> > 
> > cat /proc/tty/driver/atmel_serial 
> > serinfo:1.0 driver revision:
> > 0: uart:ATMEL_SERIAL mmio:0xFEFFF200 irq:1 tx:0 rx:0 CTS|DSR|CD|RI
> > 1: uart:ATMEL_SERIAL mmio:0xFFFC0000 irq:6 tx:0 rx:0 CTS|DSR|CD|RI             
> > 2: uart:ATMEL_SERIAL mmio:0xFFFC4000 irq:7 tx:0 rx:0 RI                        
> > 3: uart:ATMEL_SERIAL mmio:0xFFFC8000 irq:8 tx:1530 rx:115 brk:1 RTS|DTR|DSR|CD|RI
> > 4: uart:ATMEL_SERIAL mmio:0xFFFCC000 irq:9 tx:0 rx:0 DSR|CD|RI  
> > 
> > brk is 1 not depending on how many breaks was sent. May be I missunderstood
> > "break" meaning?
> > I use from minicom: Main Functions : send break.........F . 
> 
> Note that if you want to use magic sysrq on ttyAT3, you need the kernel
> console on ttyAT3.  Since you successfully received one break event on
> ttyAT3, the next character should have caused a sysrq event.
> 

Yes, I added to kernel command line "console=ttyAT3,115200" . 

I do not receive brk event via minicom, break counter sets to 1 only if I issue
this command: stty -F /dev/ttyAT3 brkint 

Anyway I try to debug further to locate the problem.

BR,
Ivan
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/