Re: [PATCH] - Add IOAPIC NMI support on x86_64

[John Keller]

>
> John Keller <jpk@xxxxxxx> writes:
>
> > Add support for IOAPIC NMI interrupts on x86_64.
> >
> > Changes include the following:
> >
> >   - Obtain the NMI IOAPIC info via an ACPI NMI SRC structure that is
> >     part of the MADT, and program the IOAPIC redirection register.
> >     The NMI SRC struct will contain the GSI of the NMI interrupt.
> >
> >   - Setup irq_desc[] and irq_2_pin[] entries for the NMI interrupt irq,
> >     which will be used by the generic mask/unmask routines. This will
> >     allow a driver to enable/disable the NMI interrupt via
> >     enable/disable_irq().
>
> What's the motivation for this patch?

 In our specific case, a loadable driver will register to process
 the NMI generated by a timer device on the IOAPIC pin. The driver
 will need to unmask/mask the NMI interrupt at init/exit time.

 The timer NMI interrupt will be used to synchronize cluster nodes.

John


>
> -Andi
>

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/