Re: Broadcom (bnx2) on PE1950/2950 failure

[Robert Hancock]

Fortier,Vincent [Montreal] wrote:
> Here is part of the dmesg:
> [root@localhost /root]# dmesg | grep -i eth
> [  119.196375] Broadcom NetXtreme II Gigabit Ethernet Driver bnx2
> v1.5.8.1 (May 7, 2007)
> [  119.215023] eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X
> 64-bit 133MHz found at mem f8000000, IRQ 17, node addr 0019b9c8eedc
> [  119.246853] eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B2) PCI-X
> 64-bit 133MHz found at mem f4000000, IRQ 16, node addr 0019b9c8eede
> [  119.458598] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network
> Connection
> [  119.654095] e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network
> Connection
> [  266.513144] bnx2: eth3: using MSI
> [  269.638237] bnx2: eth3 NIC Link is Up, 1000 Mbps full duplex, receive
> & transmit flow control ON
> [  290.242533] eth3: no IPv6 routers present
>
> As you can notice it tried to use eth0 & eth1 for both broadcom adapters
> but it did not worked properly since e1000 used them instead and finally
> bnx2 got eth3 working using MSI ?

Huh? eth0 and eth1 are the e1000 adapters, eth3 (and presumably eth2) 
are the bnx2 adapters..

--
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@xxxxxxxxxxxxx
Home Page: http://www.roberthancock.com/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/