Re: long-term regression

[david]

On Tue, 26 Jun 2007, Randy Dunlap wrote:

> On Mon, 25 Jun 2007 15:56:17 -0700 (PDT) david@xxxxxxx wrote:
>
> > due to the size the files are posted at http://linux.lang.hm/linux
> >
> > let me know what else I can send to help.
> >
> > David Lang
>
>
> I suggest that you test 2.6.22-rcN using one or both of these
> boot options:
>
> noisapnp
> pnpacpi=off
>
> Somewhere between 2.6.18 and 2.6.22-development, the ACPI config
> symbol also starting enabling (selecting) PNP.  That's one of many
> differences....

with the 2.6.22-rc4 kernel that I was useing earlier, adding these two 
options clears up the problem. Thanks.

should I test the two individually? or just plan on useing both from now 
on?
I normally disable PnP (both ISA and PCI), should I leave it enabled with 
the newer kernels and this motherboard?


> I would also disable CONFIG_USB_USS720, at least for testing.

for ease of testing (I got time to reboot the box around midnight) I used 
the same config as before, so this is still on.

David Lang

> > On Mon, 25 Jun 2007, Randy Dunlap wrote:
> >
> > > Date: Mon, 25 Jun 2007 15:40:28 -0700
> > > From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
> > > To: david@xxxxxxx
> > > Cc: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>, linux-kernel@xxxxxxxxxxxxxxx,
> > >     linux-usb-devel@xxxxxxxxxxxxxxxxxxxxx
> > > Subject: Re: long-term regression
> > >
> > > david@xxxxxxx wrote:
> > > >  On Thu, 21 Jun 2007, Randy Dunlap wrote:
> > > >
> > > > >  Date: Thu, 21 Jun 2007 08:36:59 -0700
> > > > >  From: Randy Dunlap <randy.dunlap@xxxxxxxxxx>
> > > > >  To: Andrew Morton <akpm@xxxxxxxxxxxxxxxxxxxx>
> > > > >  Cc: david@xxxxxxx, linux-kernel@xxxxxxxxxxxxxxx,
> > > > >      linux-usb-devel@xxxxxxxxxxxxxxxxxxxxx
> > > > >  Subject: Re: long-term regression
> > > > >
> > > > >  On Thu, 21 Jun 2007 05:28:07 -0700 Andrew Morton wrote:
> > > > >
> > > > > > >  On Sun, 17 Jun 2007 10:57:55 -0700 (PDT) david@xxxxxxx wrote:
> > > > > > >  I haven't had time to bisect this, but I'm having a problem on a
> > > > > > >  AMD64
> > > > > > >  gentoo system where the printer doesn't work with recent kernels.
> > > > > > >
> > > > > > >  2.6.18-rc3 worked
> > > > > > >  2.6.21.1 doesn't
> > > > > > >  2.6.22-rc4 doesn't
> > > > > > >
> > > > > > >  unfortunantly the system is gooted on 2.6.18 at the moment and I'm
> > > > > > >  out of
> > > > > > >  town so my ability to test is limited I can provide the 2.6.22-rc4
> > > > > > >  (attached) and 2.6.18-rc3 configs.
> > > > > > >
> > > > > > >  dmesg appears to show the port being detected, but writes to the
> > > > > > >  port
> > > > > > >  under newer kernels appear to complete, but no data gets to the
> > > > > > >  printer.
> > > > > > >
> > > > > > >  any suggestions other then doing the large bisect?
> > > > > >
> > > > > >  That would be good, thanks.  Please be sure to cc linux-usb-devel on
> > > > > >  the results.
> > > > >
> > > > >  OK, I'm curious about how someone deduced that this is a problem
> > > > >  with a USB printer vs. parallel port printer since the config file has:
> > > > >
> > > > >  CONFIG_PRINTER=y
> > > > >  CONFIG_USB_PRINTER=y
> > > > >
> > > > >  The kernel boot log should probably be posted also.
> > > >
> > > >  here is the dmesg from 2.6.22-rc4 and kern.log showing 2.6.22.-rc4 and
> > > >  2.6.180rc3
> > > >
> > > >  the printer not working is the parallel port.
> > >
> > > This email didn't show up on lkml or linux-usb-devel due to size limits (it
> > > was 900+ KB).
> > >
> > > David, please send your working 2.6.18 config file.
> > >
> > > Can you post the kernel log files on the web somewhere?
>
> ---
> ~Randy
> *** Remember to use Documentation/SubmitChecklist when testing your code ***
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/