Re: Unable to change sata NCQ depth due to readonly/sys/block/sdc/device/queue_depth file

[Robert Hancock]

Roy Franz wrote:
> Hi,
>
>  I am unable to change the NCQ settings for a sata drive that
> supports it - NCQ is always on.  This is due to the sysfs queue_depth
> file being read-only.  This is on
> vanilla 2.6.21.5 running with Debian Etch.  (Several earlier versions
> of the kernel
> had this same issue.)  The drive (WD Raptor) is hooked up to a Nvidia
> sata controller.
>
> amd64:/# ls -al /sys/block/sdc/device/queue_depth
> -r--r--r-- 1 root root 4096 2007-06-28 10:04 
> /sys/block/sdc/device/queue_depth
> amd64:/# cat /sys/block/sdc/device/queue_depth
> 31
> amd64:/#
>
> I searched but did not find any helpful information on this.  Forcing
> a change by changing permissions on the file did not work.

Looks like sata_nv is missing the change_queue_depth function in the 
SCSI host template, resulting in this file showing as read-only. I'll 
cook up a patch when I get a chance.

--
Robert Hancock      Saskatoon, SK, Canada
To email, remove "nospam" from hancockr@xxxxxxxxxxxxx
Home Page: http://www.roberthancock.com/

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/