Re: Moving MD/LVM from PPC to x86

[Neil Brown]

On Saturday June 30, turbo@xxxxxxxxxx wrote:
> Quoting Alasdair G Kergon <agk@xxxxxxxxxx>:
> 
> > On Thu, Jun 28, 2007 at 11:02:39PM +0200, Turbo Fredriksson wrote:
> >>   2. How do I move a VG/PV/LV from PPC to x86?
> >
> > The on-disk LVM2 metadata should be accessible from both
> > architectures.
> 
> Well, when I move the disks, the intel machine say that one of
> the disks don't have a partition table and that the other don't
> have any MD superblock...

Version 0.90 MD superblocks (still the default) uses host-endian
values so you cannot move between architectures directly.  However
isn't too hard to make it work. 
Firstly, use
   mdadm --examine --metadata=0.swap /dev/DEVICE

to check that you have the right devices.
Then

  mdadm --assemble /dev/md0 --update=byteorder /dev/DEV0 /dev/DEV1  ....

That should assemble the array and update the superblocks so that they
are in the right byteorder and will assemble easily in future.

NeilBrown
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/