Re: [PATCH] retrieve VBE EDID/DDC info independent of used videomode

[Daniel Drake]

H. Peter Anvin wrote:
> User error.
> Please replace user and press any key.
>
> # CONFIG_FIRMWARE_EDID is not set
>
> The user has *explicitly* disabled acquisition of EDID from the
> firmware, so of course it doesn't probe for it.

I'm not versed with all this EDID and resolution stuff, but shouldn't 
the resolution be detected correctly under all configurations?

The original problem is that as of 2.6.20.11, the resolution is 
misdetected - it is wrong by 6 pixels. The same configuration with 
2.6.20.10 works fine.

With the 2.6.20.10/2.6.20.11 configuration, the user did have 
CONFIG_FIRMWARE_EDID set. I'm not sure why he changed this for the -mm 
testing, but then again I don't understand why it should matter.

Daniel
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/