Re: [patch 10/10] *Tests* Scheduler profiling - Use immediate values
From: Mathieu Desnoyers
Date: Wed Jul 11 2007 - 01:07:52 EST
Hi,
* Li, Tong N (tong.n.li@xxxxxxxxx) wrote:
> Mathieu,
>
> > cycles_per_iter = 0.0;
> > for (i=0; i<NR_TESTS; i++) {
> > time1 = get_cycles();
> > for (j = 0; j < NR_ITER; j++) {
> > testval = &array[random() % ARRAY_SIZE];
> > }
> > time2 = get_cycles();
> > cycles_per_iter += (time2 - time1)/(double)NR_ITER;
> > }
> > cycles_per_iter /= (double)NR_TESTS;
> > printf("Just getting the pointer, doing noting with it, cycles
> per
> > iteration (mean) : %g\n", cycles_per_iter);
> >
>
> Some comments on the code:
>
> 1. random() is counted in cycle_per_iter, which can skew the results.
> You could pre-compute the random addresses and store them in an array.
> Then, during the actual timing, walk the array:
>
> index = 0;
> for (i = 0; i < ARRAY_SIZE; i++)
> index = *(int *)(array + index * CACHE_LINE_SIZE);
>
> 2. You may want to flush the cache before the timing starts.
>
> 3. You want to access memory at the cache-line granularity to avoid
> addresses falling into the same line (and thus unwanted hits).
>
This is true, my test code was not perfect. Thanks for the hints.
The improvements you propose will clearly accelerate my test program
quite a bit, but I doubt that it will cause even higher memory
latencies. Although using a random() at each memory access is slow, it
should give a good enough dispersion. And since do 3 cache trashing
passes in my code, I make sure that each and every cache lines are
trashed. In fact, since I do multiple accesses to each cache line (as
you noted in point 3), it takes more time, but makes it more certain
that I hit all of them at least once.
> If you do these, I expect you'll get a higher memory latency.
>
I will use these comments in my next tests, thanks. :) However, I still
feel confident that the numbers I got from my run still hold.
Mathieu
> tong
>
--
Mathieu Desnoyers
Computer Engineering Ph.D. Student, Ecole Polytechnique de Montreal
OpenPGP key fingerprint: 8CD5 52C3 8E3C 4140 715F BA06 3F25 A8FE 3BAE 9A68
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/