Re: [PATCH] sb1250-duart.c: SB1250 DUART serial support

[Andrew Morton]

On Thu, 12 Jul 2007 18:39:00 +0100 (BST)
"Maciej W. Rozycki" <macro@xxxxxxxxxxxxxx> wrote:

>  This is a driver for the SB1250 DUART, a dual serial port implementation 
> included in the Broadcom family of SOCs descending from the SiByte SB1250 
> MIPS64 chip multiprocessor.  It is a new implementation replacing the 
> old-fashioned driver currently present in the linux-mips.org tree.  It 
> supports all the usual features one would expect from a(n asynchronous) 
> serial driver, including modem line control (as far as hardware supports 
> it -- there is edge detection logic missing from the DCD and RI lines and 
> the driver does not implement polling of these lines at the moment), the 
> serial console, BREAK transmission and reception, including the magic 
> SysRq.  The receive FIFO threshold is not maintained though.
> 
> ...
>
> +
> +#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80)
> +#include <asm/sibyte/bcm1480_regs.h>
> +#include <asm/sibyte/bcm1480_int.h>
> +
> +#define SBD_CHANREGS(line)	A_BCM1480_DUART_CHANREG((line), 0)
> +#define SBD_CTRLREGS(line)	A_BCM1480_DUART_CTRLREG((line), 0)
> +#define SBD_INT(line)		(K_BCM1480_INT_UART_0 + (line))
> +
> +#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X)
> +#include <asm/sibyte/sb1250_regs.h>
> +#include <asm/sibyte/sb1250_int.h>
> +
> +#define SBD_CHANREGS(line)	A_DUART_CHANREG((line), 0)
> +#define SBD_CTRLREGS(line)	A_DUART_CTRLREG(0)
> +#define SBD_INT(line)		(K_INT_UART_0 + (line))
> +
> +#else
> +#error invalid SB1250 UART configuration
> +
> +#endif

If the #error can trigger, the Kconfig is broken, yes?  (No action is
required though - it's always good to have checks)

> +#define to_sport(uport) container_of(uport, struct sbd_port, port)

That didn't need to be implemented as a macro.

> +#define __unused __attribute__((__unused__))

Please use the generic implementations here.  `grep unused
include/linux/compiler*.h'.

> +/*
> + * In bug 1956, we get glitches that can mess up uart registers.  This
> + * "read-mode-reg after any register access" is an accepted workaround.
> + */

<looks in bugzilla.kernel.org>

<wonders how a uart driver can fix an smbfs bug>

Perhaps a reference to where that bug number came from?

> +static void __war_sbd1956(struct sbd_port *sport)
> +{
> +	__read_sbdchn(sport, R_DUART_MODE_REG_1);
> +	__read_sbdchn(sport, R_DUART_MODE_REG_2);
> +}
>
> ...
>
> +static struct uart_ops sbd_ops = {

I suppose if we made this const, something would blow up.




There is no power management support in this driver.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/