[PATCH 1/5] atl1: remove irq_sem

[Jay Cliburn]

Remove unnecessary irq_sem code.

Signed-off-by: Chris Snook <csnook@xxxxxxxxxx>
Signed-off-by: Jay Cliburn <jacliburn@xxxxxxxxxxxxx>
---
 drivers/net/atl1/atl1.h      |    1 -
 drivers/net/atl1/atl1_main.c |    6 ++----
 2 files changed, 2 insertions(+), 5 deletions(-)

diff --git a/drivers/net/atl1/atl1.h b/drivers/net/atl1/atl1.h
index b1c6034..a769e7b 100644
--- a/drivers/net/atl1/atl1.h
+++ b/drivers/net/atl1/atl1.h
@@ -236,7 +236,6 @@ struct atl1_adapter {
 	u16 link_speed;
 	u16 link_duplex;
 	spinlock_t lock;
-	atomic_t irq_sem;
 	struct work_struct tx_timeout_task;
 	struct work_struct link_chg_task;
 	struct work_struct pcie_dma_to_rst_task;
diff --git a/drivers/net/atl1/atl1_main.c b/drivers/net/atl1/atl1_main.c
index 3bb40dd..ef12dba 100644
--- a/drivers/net/atl1/atl1_main.c
+++ b/drivers/net/atl1/atl1_main.c
@@ -162,7 +162,6 @@ static int __devinit atl1_sw_init(struct atl1_adapter *adapter)
 	hw->cmb_tx_timer = 1;	/* about 2us */
 	hw->smb_timer = 100000;	/* about 200ms */
 
-	atomic_set(&adapter->irq_sem, 0);
 	spin_lock_init(&adapter->lock);
 	spin_lock_init(&adapter->mb_lock);
 
@@ -268,8 +267,8 @@ err_nomem:
  */
 static void atl1_irq_enable(struct atl1_adapter *adapter)
 {
-	if (likely(!atomic_dec_and_test(&adapter->irq_sem)))
-		iowrite32(IMR_NORMAL_MASK, adapter->hw.hw_addr + REG_IMR);
+	iowrite32(IMR_NORMAL_MASK, adapter->hw.hw_addr + REG_IMR);
+	ioread32(adapter->hw.hw_addr + REG_IMR);
 }
 
 static void atl1_clear_phy_int(struct atl1_adapter *adapter)
@@ -1195,7 +1194,6 @@ static u32 atl1_configure(struct atl1_adapter *adapter)
  */
 static void atl1_irq_disable(struct atl1_adapter *adapter)
 {
-	atomic_inc(&adapter->irq_sem);
 	iowrite32(0, adapter->hw.hw_addr + REG_IMR);
 	ioread32(adapter->hw.hw_addr + REG_IMR);
 	synchronize_irq(adapter->pdev->irq);
-- 
1.5.2.2

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/