Re: 2.6.20->2.6.21 - networking dies after random time
From: Marcin Ślusarz
Date: Tue Aug 07 2007 - 03:46:41 EST
2007/8/6, Ingo Molnar <mingo@xxxxxxx>:
> (..)
> please try Jarek's second patch too - there was a missing unmask.
>
> Ingo
>
> -------------->
> Subject: genirq: fix simple and fasteoi irq handlers
> From: Jarek Poplawski <jarkao2@xxxxx>
>
> After the "genirq: do not mask interrupts by default" patch interrupts
> should be disabled not immediately upon request, but after they happen.
> But, handle_simple_irq() and handle_fasteoi_irq() can skip this once or
> more if an irq is just serviced (IRQ_INPROGRESS), possibly disrupting a
> driver's work.
>
> The main reason of problems here, pointing the broken patch and making
> the first patch which can fix this was done by Marcin Slusarz.
> Additional test patches of Thomas Gleixner and Ingo Molnar tested by
> Marcin Slusarz helped to narrow possible reasons even more. Thanks.
>
> PS: this patch fixes only one evident error here, but there could be
> more places affected by above-mentioned change in irq handling.
>
> PS 2:
> After rethinking, IMHO, there are two most probable scenarios here:
>
> 1. After hw resend there could be a conflict between retriggered
> edge type irq and the next level type one: e.g. if this level type
> irq (io_apic is enabled then) is triggered while retriggered irq is
> serviced (IRQ_INPROGRESS) there is goto out with eoi, and probably
> the next such levels are triggered and looping, so probably kind of
> flood in io_apic until this retriggered edge service has ended.
> 2. There is something wrong with ioapic_retrigger_irq (less probable
> because this should be probably seen with 'normal' edge retriggers,
> but on the other hand, they could be less common).
>
> So, if there is #1, this fixed patch should work.
>
> But, since level types don't need this retriggers too much I think
> this "don't mask interrupts by default" idea should be rethinked:
> is there enough gain to risk such hard to diagnose errors?
>
> So, IMHO, there should be at least possibility to turn this off for
> level types in config (it should be a visible option, so people could
> find & try this before writing for help or changing a network card).
>
>
> Signed-off-by: Jarek Poplawski <jarkao2@xxxxx>
>
> ---
>
> diff -Nurp 2.6.23-rc1-/kernel/irq/chip.c 2.6.23-rc1/kernel/irq/chip.c
> --- 2.6.23-rc1-/kernel/irq/chip.c 2007-07-09 01:32:17.000000000 +0200
> +++ 2.6.23-rc1/kernel/irq/chip.c 2007-08-05 21:49:46.000000000 +0200
> @@ -295,12 +295,11 @@ handle_simple_irq(unsigned int irq, stru
>
> spin_lock(&desc->lock);
>
> - if (unlikely(desc->status & IRQ_INPROGRESS))
> - goto out_unlock;
> kstat_cpu(cpu).irqs[irq]++;
>
> action = desc->action;
> - if (unlikely(!action || (desc->status & IRQ_DISABLED))) {
> + if (unlikely(!action || (desc->status & (IRQ_INPROGRESS |
> + IRQ_DISABLED)))) {
> if (desc->chip->mask)
> desc->chip->mask(irq);
> desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
> @@ -318,6 +317,8 @@ handle_simple_irq(unsigned int irq, stru
>
> spin_lock(&desc->lock);
> desc->status &= ~IRQ_INPROGRESS;
> + if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
> + desc->chip->unmask(irq);
> out_unlock:
> spin_unlock(&desc->lock);
> }
> @@ -392,18 +393,16 @@ handle_fasteoi_irq(unsigned int irq, str
>
> spin_lock(&desc->lock);
>
> - if (unlikely(desc->status & IRQ_INPROGRESS))
> - goto out;
> -
> desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
> kstat_cpu(cpu).irqs[irq]++;
>
> /*
> - * If its disabled or no action available
> + * If it's running, disabled or no action available
> * then mask it and get out of here:
> */
> action = desc->action;
> - if (unlikely(!action || (desc->status & IRQ_DISABLED))) {
> + if (unlikely(!action || (desc->status & (IRQ_INPROGRESS |
> + IRQ_DISABLED)))) {
> desc->status |= IRQ_PENDING;
> if (desc->chip->mask)
> desc->chip->mask(irq);
> @@ -420,6 +419,8 @@ handle_fasteoi_irq(unsigned int irq, str
>
> spin_lock(&desc->lock);
> desc->status &= ~IRQ_INPROGRESS;
> + if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask)
> + desc->chip->unmask(irq);
> out:
> desc->chip->eoi(irq);
>
>
Network card still locks up (tested on 2.6.22.1). I had to upload more
data than usual (~350 MB vs ~1-100 MB) to trigger that bug but it
might be a coincidence...
Marcin
-
To unsubscribe from this list: send the line "unsubscribe linux-net" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html