Re: Disk spin down issue on shut down/suspend to disk

[Mark Lord]

Tejun Heo wrote:
> Mark Lord wrote:
> > Further to this, if I have an active-writer running at the time of suspend,
> > then even my scripted "sleep 1" is not good enough, as additional writes
> > are still happening before/after the flush.
> >
> > Now I'll reboot and try it with the "sleep 1" hardcoded inside
> > sd_suspend().
>
> Hmmm... queue quiescing might be broken.  Can you verify there's no
> command issued between STANDBYNOW1 and suspending?

Yeah, I verified that already.  Nothing happens other than
the FLUSH_CACHE_EXT and STANDBY commands.

I've now tried adding various sleeps into the sd_suspend() routine.
The sleeps actually do sleep, but they don't seem to solve the problem there.
The "hdparm -F /dev/sda ; sleep 1" inside my script actually works better,
though even it fails if there's a ton of writes happening.

I put a 4-second sleep in front of the sd_start_stop_device() call,
and here is what I observed:

the disk light flickers briefly,
then the system does absolutely nothing for the 4-seconds,
and then it flickers again,
and then the light comes on solid for a second or two,
and then it suspends.

I am ssssoooooooo confused now.  :)

We need Eric (from Seagate) to enlighten us.

Cheers

-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/