Re: UART misbehaves under Linkstation/KuroBoxHG

[Guennadi Liakhovetski]

On Thu, 9 Aug 2007, Oncaphillis wrote:
> 
>   I hope I found the the misconfigured part. I didn't look
>   at /etc/inittab. It opens a getty on /dev/ttyS0. That
>   might do the trick. Have to recompile my kernel right now with
>   standard config to check this out.

Hm, for that you don't have to recompile the kernel... unless you modified 
it before, of course. Just change your inittab and reboot.

>   Well ... it doesn't seem to need the daemons but at least
>   the kuro_boot  script or something similar has to be executed
>   once sending the right init strings to the AVR or your system
>   reboots after a few minutes at least on my box.

No, shouldn't be needed either. You should get a string in dmesg like 
"linkstation: disarming the AVR watchdog:", and the watchdog should be 
off. Just take the original .dts, unmodified kernel sources and close 
enough to original (arch/powerpc/configs/linkstation_defconfig) .config 
and it should work.

Thanks
Guennadi
---
Guennadi Liakhovetski
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/