Re: [PATCH] Add missing KERN_<level> to multilineprintk(KERN_<level>...)

From: Grant Grundler
Date: Thu Aug 09 2007 - 02:26:36 EST

On Wed, Aug 08, 2007 at 05:28:46PM -0700, Joe Perches wrote:
> Some uses of printk are missing KERN_<level> on the second
> and subsequent lines.

Nice! Thanks!

ACK the three parisc-linux bits.

thanks,
grant

>
> For instance:
>
> printk(KERN_INFO "line1: %d\nline2: %d\n", val1, val2);
>
> Line1 is marked log_level: info
> Line2 is marked log_level: unknown
>
> Some lines have trailing spaces after \n, removed where appropriate.
>
> Signed-off-by: Joe Perches <joe@xxxxxxxxxxx>
>
> arch/arm/kernel/ecard.c | 3 ++-
> arch/blackfin/kernel/dualcore_test.c | 3 ++-
> arch/blackfin/kernel/traps.c | 4 +++-
> arch/h8300/kernel/setup.c | 4 +++-
> arch/i386/kernel/io_apic.c | 3 ++-
> arch/m68knommu/kernel/setup.c | 4 +++-
> arch/m68knommu/kernel/traps.c | 5 +++--
> arch/m68knommu/mm/init.c | 9 ++++++---
> arch/m68knommu/platform/68328/config.c | 3 ++-
> arch/m68knommu/platform/68360/config.c | 3 ++-
> arch/m68knommu/platform/68EZ328/config.c | 3 ++-
> arch/mips/vr41xx/common/pmu.c | 9 ++++++---
> arch/parisc/kernel/traps.c | 3 ++-
> arch/parisc/math-emu/driver.c | 5 +++--
> arch/v850/kernel/setup.c | 6 ++++--
> arch/x86_64/kernel/io_apic.c | 3 ++-
> arch/x86_64/kernel/mpparse.c | 3 ++-
> drivers/acpi/acpi_memhotplug.c | 3 ++-
> drivers/char/dtlk.c | 3 ++-
> drivers/char/tpm/tpm_bios.c | 2 +-
> drivers/ide/ide-cd.c | 3 ++-
> drivers/input/serio/hil_mlc.c | 2 +-
> drivers/message/fusion/mptlan.c | 3 ++-
> drivers/mtd/maps/cdb89712.c | 5 ++++-
> drivers/net/cs89x0.c | 2 +-
> drivers/net/dgrs.c | 3 ++-
> drivers/net/wireless/arlan-main.c | 2 +-
> drivers/net/wireless/arlan-proc.c | 19 ++++++++++---------
> drivers/parisc/led.c | 3 ++-
> drivers/scsi/aha152x.c | 16 +++++++++++-----
> drivers/scsi/dpt_i2o.c | 3 ++-
> drivers/scsi/mac_scsi.c | 3 ++-
> drivers/scsi/megaraid.c | 3 ++-
> drivers/scsi/megaraid/megaraid_sas.c | 25 ++++++++++++++++---------
> drivers/scsi/osst.c | 3 ++-
> drivers/scsi/zalon.c | 2 +-
> drivers/video/savage/savagefb_driver.c | 21 ++++++++++++---------
> fs/dlm/dlm_internal.h | 9 +++++----
> fs/freevxfs/vxfs_bmap.c | 8 ++++++--
> fs/jffs2/wbuf.c | 3 ++-
> mm/slub.c | 18 ++++++++++++------
> 41 files changed, 152 insertions(+), 85 deletions(-)
>
> diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
> index f56d48c..6402ad2 100644
> --- a/arch/arm/kernel/ecard.c
> +++ b/arch/arm/kernel/ecard.c
> @@ -547,7 +547,8 @@ static void ecard_check_lockup(struct irq_desc *desc)
> if (last == jiffies) {
> lockup += 1;
> if (lockup > 1000000) {
> - printk(KERN_ERR "\nInterrupt lockup detected - "
> + printk(KERN_ERR "\n"
> + KERN_ERR "Interrupt lockup detected - "
> "disabling all expansion card interrupts\n");
>
> desc->chip->mask(IRQ_EXPANSIONCARD);
> diff --git a/arch/blackfin/kernel/dualcore_test.c b/arch/blackfin/kernel/dualcore_test.c
> index 0fcba74..3c94199 100644
> --- a/arch/blackfin/kernel/dualcore_test.c
> +++ b/arch/blackfin/kernel/dualcore_test.c
> @@ -35,7 +35,8 @@ static int *testarg = (int *)0xfeb00000;
> static int test_init(void)
> {
> *testarg = 1;
> - printk(KERN_INFO "Dual core test module inserted: set testarg = [%d]\n @ [%p]\n",
> + printk(KERN_INFO "Dual core test module inserted: set testarg = [%d]\n"
> + KERN_INFO "@ [%p]\n",
> *testarg, testarg);
> return 0;
> }
> diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c
> index 8766bd6..f76b78b 100644
> --- a/arch/blackfin/kernel/traps.c
> +++ b/arch/blackfin/kernel/traps.c
> @@ -350,7 +350,9 @@ asmlinkage void trap_c(struct pt_regs *fp)
> info.si_code = ILL_CPLB_MULHIT;
> #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO
> sig = SIGSEGV;
> - printk(KERN_EMERG "\n\nJump to address 0 - 0x0fff\n");
> + printk(KERN_EMERG "\n"
> + KERN_EMERG "\n"
> + KERN_EMERG "Jump to address 0 - 0x0fff\n");
> #else
> sig = SIGILL;
> printk(KERN_EMERG EXC_0x2D);
> diff --git a/arch/h8300/kernel/setup.c b/arch/h8300/kernel/setup.c
> index b2e86d0..cb45404 100644
> --- a/arch/h8300/kernel/setup.c
> +++ b/arch/h8300/kernel/setup.c
> @@ -127,7 +127,9 @@ void __init setup_arch(char **cmdline_p)
> register_console((struct console *)&gdb_console);
> #endif
>
> - printk(KERN_INFO "\r\n\nuClinux " CPU "\n");
> + printk(KERN_INFO "\r\n"
> + KERN_INFO "\n"
> + KERN_INFO "uClinux " CPU "\n");
> printk(KERN_INFO "Target Hardware: %s\n",_target_name);
> printk(KERN_INFO "Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n");
> printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@xxxxxxxxxxxxxxxxxxxx>\n");
> diff --git a/arch/i386/kernel/io_apic.c b/arch/i386/kernel/io_apic.c
> index 893df82..c5da892 100644
> --- a/arch/i386/kernel/io_apic.c
> +++ b/arch/i386/kernel/io_apic.c
> @@ -1615,7 +1615,8 @@ void /*__init*/ print_PIC(void)
> if (apic_verbosity == APIC_QUIET)
> return;
>
> - printk(KERN_DEBUG "\nprinting PIC contents\n");
> + printk(KERN_DEBUG "\n"
> + KERN_DEBUG "printing PIC contents\n");
>
> spin_lock_irqsave(&i8259A_lock, flags);
>
> diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c
> index 3f86ade..7c0dd75 100644
> --- a/arch/m68knommu/kernel/setup.c
> +++ b/arch/m68knommu/kernel/setup.c
> @@ -135,7 +135,9 @@ void setup_arch(char **cmdline_p)
> command_line[sizeof(command_line) - 1] = 0;
> #endif
>
> - printk(KERN_INFO "\x0F\r\n\nuClinux/" CPU "\n");
> + printk(KERN_INFO "\x0F\r\n"
> + KERN_INFO "\n"
> + KERN_INFO "uClinux/" CPU "\n");
>
> #ifdef CONFIG_UCDIMM
> printk(KERN_INFO "uCdimm by Lineo, Inc. <www.lineo.com>\n");
> diff --git a/arch/m68knommu/kernel/traps.c b/arch/m68knommu/kernel/traps.c
> index 437a061..a66c348 100644
> --- a/arch/m68knommu/kernel/traps.c
> +++ b/arch/m68knommu/kernel/traps.c
> @@ -71,8 +71,9 @@ void die_if_kernel(char *str, struct pt_regs *fp, int nr)
>
> console_verbose();
> printk(KERN_EMERG "%s: %08x\n",str,nr);
> - printk(KERN_EMERG "PC: [<%08lx>]\nSR: %04x SP: %p a2: %08lx\n",
> - fp->pc, fp->sr, fp, fp->a2);
> + printk(KERN_EMERG "PC: [<%08lx>]\n", fp->pc);
> + printk(KERN_EMERG "SR: %04x SP: %p a2: %08lx\n",
> + fp->sr, fp, fp->a2);
> printk(KERN_EMERG "d0: %08lx d1: %08lx d2: %08lx d3: %08lx\n",
> fp->d0, fp->d1, fp->d2, fp->d3);
> printk(KERN_EMERG "d4: %08lx d5: %08lx a0: %08lx a1: %08lx\n",
> diff --git a/arch/m68knommu/mm/init.c b/arch/m68knommu/mm/init.c
> index 06e538d..970f1a1 100644
> --- a/arch/m68knommu/mm/init.c
> +++ b/arch/m68knommu/mm/init.c
> @@ -68,7 +68,8 @@ void show_mem(void)
> int free = 0, total = 0, reserved = 0, shared = 0;
> int cached = 0;
>
> - printk(KERN_INFO "\nMem-info:\n");
> + printk(KERN_INFO "\n"
> + KERN_INFO "Mem-info:\n");
> show_free_areas();
> i = max_mapnr;
> while (i-- > 0) {
> @@ -110,7 +111,8 @@ void paging_init(void)
> unsigned long end_mem = memory_end & PAGE_MASK;
>
> #ifdef DEBUG
> - printk (KERN_DEBUG "start_mem is %#lx\nvirtual_end is %#lx\n",
> + printk (KERN_DEBUG "start_mem is %#lx\n"
> + KERN_DEBUG "virtual_end is %#lx\n",
> start_mem, end_mem);
> #endif
>
> @@ -131,7 +133,8 @@ void paging_init(void)
> #ifdef DEBUG
> printk (KERN_DEBUG "before free_area_init\n");
>
> - printk (KERN_DEBUG "free_area_init -> start_mem is %#lx\nvirtual_end is %#lx\n",
> + printk (KERN_DEBUG "free_area_init -> start_mem is %#lx\n"
> + KERN_DEBUG "virtual_end is %#lx\n",
> start_mem, end_mem);
> #endif
>
> diff --git a/arch/m68knommu/platform/68328/config.c b/arch/m68knommu/platform/68328/config.c
> index e5c537d..07c73c9 100644
> --- a/arch/m68knommu/platform/68328/config.c
> +++ b/arch/m68knommu/platform/68328/config.c
> @@ -55,7 +55,8 @@ void m68328_reset (void)
>
> void config_BSP(char *command, int len)
> {
> - printk(KERN_INFO "\n68328 support D. Jeff Dionne <jeff@xxxxxxxxxxx>\n");
> + printk(KERN_INFO "\n"
> + KERN_INFO "68328 support D. Jeff Dionne <jeff@xxxxxxxxxxx>\n");
> printk(KERN_INFO "68328 support Kenneth Albanowski <kjahds@xxxxxxxxxx>\n");
> printk(KERN_INFO "68328/Pilot support Bernhard Kuhn <kuhn@xxxxxxxxxxxxxxxxxxxxxxxxxxxx>\n");
>
> diff --git a/arch/m68knommu/platform/68360/config.c b/arch/m68knommu/platform/68360/config.c
> index 155b72f..2392fc0 100644
> --- a/arch/m68knommu/platform/68360/config.c
> +++ b/arch/m68knommu/platform/68360/config.c
> @@ -183,7 +183,8 @@ void config_BSP(char *command, int len)
> }
> }
>
> - printk(KERN_INFO "\n68360 QUICC support (C) 2000 Lineo Inc.\n");
> + printk(KERN_INFO "\n"
> + KERN_INFO "68360 QUICC support (C) 2000 Lineo Inc.\n");
>
> #if defined(CONFIG_UCQUICC) && 0
> printk(KERN_INFO "uCquicc serial string [%s]\n",getserialnum());
> diff --git a/arch/m68knommu/platform/68EZ328/config.c b/arch/m68knommu/platform/68EZ328/config.c
> index ab36551..f344edf 100644
> --- a/arch/m68knommu/platform/68EZ328/config.c
> +++ b/arch/m68knommu/platform/68EZ328/config.c
> @@ -66,7 +66,8 @@ void config_BSP(char *command, int len)
> {
> unsigned char *p;
>
> - printk(KERN_INFO "\n68EZ328 DragonBallEZ support (C) 1999 Rt-Control, Inc\n");
> + printk(KERN_INFO "\n"
> + KERN_INFO "68EZ328 DragonBallEZ support (C) 1999 Rt-Control, Inc\n");
>
> #ifdef CONFIG_UCSIMM
> printk(KERN_INFO "uCsimm serial string [%s]\n",getserialnum());
> diff --git a/arch/mips/vr41xx/common/pmu.c b/arch/mips/vr41xx/common/pmu.c
> index 5e46979..ada7f15 100644
> --- a/arch/mips/vr41xx/common/pmu.c
> +++ b/arch/mips/vr41xx/common/pmu.c
> @@ -65,21 +65,24 @@ static void vr41xx_restart(char *command)
> {
> local_irq_disable();
> software_reset();
> - printk(KERN_NOTICE "\nYou can reset your system\n");
> + printk(KERN_NOTICE "\n"
> + KERN_NOTICE "You can reset your system\n");
> while (1) ;
> }
>
> static void vr41xx_halt(void)
> {
> local_irq_disable();
> - printk(KERN_NOTICE "\nYou can turn off the power supply\n");
> + printk(KERN_NOTICE "\n"
> + KERN_NOTICE "You can turn off the power supply\n");
> while (1) ;
> }
>
> static void vr41xx_power_off(void)
> {
> local_irq_disable();
> - printk(KERN_NOTICE "\nYou can turn off the power supply\n");
> + printk(KERN_NOTICE "\n"
> + KERN_NOTICE "You can turn off the power supply\n");
> while (1) ;
> }
>
> diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
> index bbf029a..6a29d4c 100644
> --- a/arch/parisc/kernel/traps.c
> +++ b/arch/parisc/kernel/traps.c
> @@ -746,7 +746,8 @@ void handle_interruption(int code, struct pt_regs *regs)
> default:
> if (user_mode(regs)) {
> #ifdef PRINT_USER_FAULTS
> - printk(KERN_DEBUG "\nhandle_interruption() pid=%d command='%s'\n",
> + printk(KERN_DEBUG "\n"
> + KERN_DEBUG "handle_interruption() pid=%d command='%s'\n",
> current->pid, current->comm);
> show_regs(regs);
> #endif
> diff --git a/arch/parisc/math-emu/driver.c b/arch/parisc/math-emu/driver.c
> index 09ef413..534ce20 100644
> --- a/arch/parisc/math-emu/driver.c
> +++ b/arch/parisc/math-emu/driver.c
> @@ -98,9 +98,10 @@ handle_fpe(struct pt_regs *regs)
> memcpy(&orig_sw, frcopy, sizeof(orig_sw));
>
> if (FPUDEBUG) {
> - printk(KERN_DEBUG "FP VZOUICxxxxCQCQCQCQCQCRMxxTDVZOUI ->\n ");
> + printk(KERN_DEBUG "FP VZOUICxxxxCQCQCQCQCQCRMxxTDVZOUI ->\n"
> + KERN_DEBUG " ");
> printbinary(orig_sw, 32);
> - printk(KERN_DEBUG "\n");
> + printk("\n");
> }
>
> signalcode = decode_fpu(frcopy, 0x666);
> diff --git a/arch/v850/kernel/setup.c b/arch/v850/kernel/setup.c
> index a914f24..35cf93a 100644
> --- a/arch/v850/kernel/setup.c
> +++ b/arch/v850/kernel/setup.c
> @@ -79,7 +79,8 @@ void __init setup_arch (char **cmdline)
> /* ... and tell the kernel about it. */
> init_mem_alloc (ram_start, ram_len);
>
> - printk (KERN_INFO "CPU: %s\nPlatform: %s\n",
> + printk (KERN_INFO "CPU: %s\n"
> + KERN_INFO "Platform: %s\n",
> CPU_MODEL_LONG, PLATFORM_LONG);
>
> /* do machine-specific setups. */
> @@ -304,7 +305,8 @@ void show_mem(void)
> int free = 0, total = 0, reserved = 0, shared = 0;
> int cached = 0;
>
> - printk(KERN_INFO "\nMem-info:\n");
> + printk(KERN_INFO "\n"
> + KERN_INFO "Mem-info:\n");
> show_free_areas();
> i = max_mapnr;
> while (i-- > 0) {
> diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c
> index 050141c..4bb2b65 100644
> --- a/arch/x86_64/kernel/io_apic.c
> +++ b/arch/x86_64/kernel/io_apic.c
> @@ -1139,7 +1139,8 @@ void __apicdebuginit print_PIC(void)
> if (apic_verbosity == APIC_QUIET)
> return;
>
> - printk(KERN_DEBUG "\nprinting PIC contents\n");
> + printk(KERN_DEBUG "\n"
> + KERN_DEBUG "printing PIC contents\n");
>
> spin_lock_irqsave(&i8259A_lock, flags);
>
> diff --git a/arch/x86_64/kernel/mpparse.c b/arch/x86_64/kernel/mpparse.c
> index 8bf0ca0..d32e640 100644
> --- a/arch/x86_64/kernel/mpparse.c
> +++ b/arch/x86_64/kernel/mpparse.c
> @@ -411,7 +411,8 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type)
> bus.mpc_busid = 0;
> switch (mpc_default_type) {
> default:
> - printk(KERN_ERR "???\nUnknown standard configuration %d\n",
> + printk(KERN_ERR "\n"
> + KERN_ERR "???Unknown standard configuration %d\n",
> mpc_default_type);
> /* fall through */
> case 1:
> diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
> index 5f1127a..61e51ca 100644
> --- a/drivers/acpi/acpi_memhotplug.c
> +++ b/drivers/acpi/acpi_memhotplug.c
> @@ -185,7 +185,8 @@ acpi_memory_get_device(acpi_handle handle,
> end:
> *mem_device = acpi_driver_data(device);
> if (!(*mem_device)) {
> - printk(KERN_ERR "\n driver data not found");
> + printk(KERN_ERR "\n"
> + KERN_ERR "driver data not found");
> return -ENODEV;
> }
>
> diff --git a/drivers/char/dtlk.c b/drivers/char/dtlk.c
> index abde6dd..0bf01c6 100644
> --- a/drivers/char/dtlk.c
> +++ b/drivers/char/dtlk.c
> @@ -495,7 +495,8 @@ for (i = 0; i < 10; i++) \
> /*
> static void dtlk_handle_error(char op, char rc, unsigned int minor)
> {
> - printk(KERN_INFO"\nDoubleTalk PC - MINOR: %d, OPCODE: %d, ERROR: %d\n",
> + printk(KERN_INFO "\n"
> + KERN_INFO "DoubleTalk PC - MINOR: %d, OPCODE: %d, ERROR: %d\n",
> minor, op, rc);
> return;
> }
> diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c
> index 8677fc6..80400cf 100644
> --- a/drivers/char/tpm/tpm_bios.c
> +++ b/drivers/char/tpm/tpm_bios.c
> @@ -319,7 +319,7 @@ static int tpm_ascii_bios_measurements_show(struct seq_file *m, void *v)
>
> eventname = kmalloc(MAX_TEXT_EVENT, GFP_KERNEL);
> if (!eventname) {
> - printk(KERN_ERR "%s: ERROR - No Memory for event name\n ",
> + printk(KERN_ERR "%s: ERROR - No Memory for event name\n",
> __func__);
> return -EFAULT;
> }
> diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
> index ca84352..31fcbe8 100644
> --- a/drivers/ide/ide-cd.c
> +++ b/drivers/ide/ide-cd.c
> @@ -541,7 +541,8 @@ void cdrom_analyze_sense_data(ide_drive_t *drive,
> lo = mid+1;
> }
>
> - printk (KERN_ERR " The failed \"%s\" packet command was: \n \"", s);
> + printk (KERN_ERR " The failed \"%s\" packet command was:\n"
> + KERN_ERR " \"", s);
> for (i=0; i<sizeof (failed_command->cmd); i++)
> printk ("%02x ", failed_command->cmd[i]);
> printk ("\"\n");
> diff --git a/drivers/input/serio/hil_mlc.c b/drivers/input/serio/hil_mlc.c
> index 93a1a6b..ef31148 100644
> --- a/drivers/input/serio/hil_mlc.c
> +++ b/drivers/input/serio/hil_mlc.c
> @@ -625,7 +625,7 @@ static int hilse_donode(hil_mlc *mlc)
> #ifdef HIL_MLC_DEBUG
> if (mlc->seidx && mlc->seidx != seidx &&
> mlc->seidx != 41 && mlc->seidx != 42 && mlc->seidx != 43) {
> - printk(KERN_DEBUG PREFIX "z%i \n {%i}", doze, mlc->seidx);
> + printk(KERN_DEBUG PREFIX "z%i\t{%i}\n", doze, mlc->seidx);
> doze = 0;
> }
>
> diff --git a/drivers/message/fusion/mptlan.c b/drivers/message/fusion/mptlan.c
> index 01fc397..59df21e 100644
> --- a/drivers/message/fusion/mptlan.c
> +++ b/drivers/message/fusion/mptlan.c
> @@ -1318,7 +1318,8 @@ mpt_lan_post_receive_buckets(struct mpt_lan_priv *priv)
>
> pRecvReq->BucketCount = cpu_to_le32(i);
>
> -/* printk(KERN_INFO MYNAM ": posting buckets\n ");
> +/* printk(KERN_INFO MYNAM ": posting buckets\n");
> + * printk(KERN_INFO " ");
> * for (i = 0; i < j + 2; i ++)
> * printk (" %08x", le32_to_cpu(msg[i]));
> * printk ("\n");
> diff --git a/drivers/mtd/maps/cdb89712.c b/drivers/mtd/maps/cdb89712.c
> index 9f17bb6..2a15cc9 100644
> --- a/drivers/mtd/maps/cdb89712.c
> +++ b/drivers/mtd/maps/cdb89712.c
> @@ -225,7 +225,10 @@ out:
> static int __init init_cdb89712_maps(void)
> {
>
> - printk(KERN_INFO "Cirrus CDB89712 MTD mappings:\n Flash 0x%x at 0x%x\n SRAM 0x%x at 0x%x\n BootROM 0x%x at 0x%x\n",
> + printk(KERN_INFO "Cirrus CDB89712 MTD mappings:\n"
> + KERN_INFO " Flash 0x%x at 0x%x\n"
> + KERN_INFO " SRAM 0x%x at 0x%x\n"
> + KERN_INFO " BootROM 0x%x at 0x%x\n",
> FLASH_SIZE, FLASH_START, SRAM_SIZE, SRAM_START, BOOTROM_SIZE, BOOTROM_START);
>
> init_cdb89712_flash();
> diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c
> index 9774bb1..536d29f 100644
> --- a/drivers/net/cs89x0.c
> +++ b/drivers/net/cs89x0.c
> @@ -731,7 +731,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
> if ((readreg(dev, PP_SelfST) & EEPROM_PRESENT) == 0)
> printk(KERN_WARNING "cs89x0: No EEPROM, relying on command line....\n");
> else if (get_eeprom_data(dev, START_EEPROM_DATA,CHKSUM_LEN,eeprom_buff) < 0) {
> - printk(KERN_WARNING "\ncs89x0: EEPROM read failed, relying on command line.\n");
> + printk(KERN_WARNING "cs89x0: EEPROM read failed, relying on command line.\n");
> } else if (get_eeprom_cksum(START_EEPROM_DATA,CHKSUM_LEN,eeprom_buff) < 0) {
> /* Check if the chip was able to read its own configuration starting
> at 0 in the EEPROM*/
> diff --git a/drivers/net/dgrs.c b/drivers/net/dgrs.c
> index df62c02..28c7bc9 100644
> --- a/drivers/net/dgrs.c
> +++ b/drivers/net/dgrs.c
> @@ -1583,7 +1583,8 @@ static int __init dgrs_init_module (void)
>
> if (dgrs_debug)
> {
> - printk(KERN_INFO "dgrs: SW=%s FW=Build %d %s\nFW Version=%s\n",
> + printk(KERN_INFO "dgrs: SW=%s FW=Build %d %s\n"
> + KERN_INFO "FW Version=%s\n",
> version, dgrs_firmnum, dgrs_firmdate, dgrs_firmver);
> }
>
> diff --git a/drivers/net/wireless/arlan-main.c b/drivers/net/wireless/arlan-main.c
> index 498e848..00edf9a 100644
> --- a/drivers/net/wireless/arlan-main.c
> +++ b/drivers/net/wireless/arlan-main.c
> @@ -1082,7 +1082,7 @@ static int __init arlan_probe_here(struct net_device *dev,
> if (arlan_check_fingerprint(memaddr))
> return -ENODEV;
>
> - printk(KERN_NOTICE "%s: Arlan found at %x, \n ", dev->name,
> + printk(KERN_NOTICE "%s: Arlan found at %x, \n", dev->name,
> (int) virt_to_phys((void*)memaddr));
>
> ap->card = (void *) memaddr;
> diff --git a/drivers/net/wireless/arlan-proc.c b/drivers/net/wireless/arlan-proc.c
> index 015abd9..6effdf6 100644
> --- a/drivers/net/wireless/arlan-proc.c
> +++ b/drivers/net/wireless/arlan-proc.c
> @@ -418,13 +418,14 @@ static int arlan_sysctl_info(ctl_table * ctl, int write, struct file *filp,
> }
> if (ctl->procname == NULL || arlan_drive_info == NULL)
> {
> - printk(KERN_WARNING " procname is NULL in sysctl_table or arlan_drive_info is NULL \n at arlan module\n ");
> + printk(KERN_WARNING " procname is NULL in sysctl_table or arlan_drive_info is NULL\n"
> + KERN_WARNING " at arlan module\n");
> return -1;
> }
> devnum = ctl->procname[5] - '0';
> if (devnum < 0 || devnum > MAX_ARLANS - 1)
> {
> - printk(KERN_WARNING "too strange devnum in procfs parse\n ");
> + printk(KERN_WARNING "too strange devnum in procfs parse\n");
> return -1;
> }
> else if (arlan_device[devnum] == NULL)
> @@ -439,7 +440,7 @@ static int arlan_sysctl_info(ctl_table * ctl, int write, struct file *filp,
>
> if (priva == NULL)
> {
> - printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
> + printk(KERN_WARNING "Could not find the device private in arlan procsys, bad\n");
> return -1;
> }
> dev = arlan_device[devnum];
> @@ -657,7 +658,7 @@ static int arlan_sysctl_info161719(ctl_table * ctl, int write, struct file *filp
> priva = arlan_device[devnum]->priv;
> if (priva == NULL)
> {
> - printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
> + printk(KERN_WARNING "Could not find the device private in arlan procsys, bad\n");
> return -1;
> }
> memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
> @@ -691,7 +692,7 @@ static int arlan_sysctl_infotxRing(ctl_table * ctl, int write, struct file *filp
> priva = arlan_device[devnum]->priv;
> if (priva == NULL)
> {
> - printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
> + printk(KERN_WARNING "Could not find the device private in arlan procsys, bad\n");
> return -1;
> }
> memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
> @@ -719,7 +720,7 @@ static int arlan_sysctl_inforxRing(ctl_table * ctl, int write, struct file *filp
> priva = arlan_device[devnum]->priv;
> if (priva == NULL)
> {
> - printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
> + printk(KERN_WARNING "Could not find the device private in arlan procsys, bad\n");
> return -1;
> }
> memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
> @@ -748,7 +749,7 @@ static int arlan_sysctl_info18(ctl_table * ctl, int write, struct file *filp,
> priva = arlan_device[devnum]->priv;
> if (priva == NULL)
> {
> - printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
> + printk(KERN_WARNING "Could not find the device private in arlan procsys, bad\n");
> return -1;
> }
> memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
> @@ -775,7 +776,7 @@ static int arlan_configure(ctl_table * ctl, int write, struct file *filp,
>
> if (devnum < 0 || devnum > MAX_ARLANS - 1)
> {
> - printk(KERN_WARNING "too strange devnum in procfs parse\n ");
> + printk(KERN_WARNING "too strange devnum in procfs parse\n");
> return -1;
> }
> else if (arlan_device[devnum] != NULL)
> @@ -800,7 +801,7 @@ static int arlan_sysctl_reset(ctl_table * ctl, int write, struct file *filp,
>
> if (devnum < 0 || devnum > MAX_ARLANS - 1)
> {
> - printk(KERN_WARNING "too strange devnum in procfs parse\n ");
> + printk(KERN_WARNING "too strange devnum in procfs parse\n");
> return -1;
> }
> else if (arlan_device[devnum] != NULL)
> diff --git a/drivers/parisc/led.c b/drivers/parisc/led.c
> index e5d7ed9..9053933 100644
> --- a/drivers/parisc/led.c
> +++ b/drivers/parisc/led.c
> @@ -230,7 +230,8 @@ static int led_proc_write(struct file *file, const char *buf,
>
> parse_error:
> if ((long)data == LED_NOLCD)
> - printk(KERN_CRIT "Parse error: expect \"n n n\" (n == 0 or 1) for heartbeat,\ndisk io and lan tx/rx indicators\n");
> + printk(KERN_CRIT "Parse error: expect \"n n n\" (n == 0 or 1) for heartbeat,\n"
> + KERN_CRIT "disk io and lan tx/rx indicators\n");
> return -EINVAL;
> }
>
> diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c
> index d30a307..0a96ff4 100644
> --- a/drivers/scsi/aha152x.c
> +++ b/drivers/scsi/aha152x.c
> @@ -2647,7 +2647,8 @@ static void is_complete(struct Scsi_Host *shpnt)
> */
> static void aha152x_error(struct Scsi_Host *shpnt, char *msg)
> {
> - printk(KERN_EMERG "\naha152x%d: %s\n", HOSTNO, msg);
> + printk(KERN_EMERG "\n"
> + KERN_EMERG "aha152x%d: %s\n", HOSTNO, msg);
> show_queues(shpnt);
> panic("aha152x panic\n");
> }
> @@ -2973,7 +2974,9 @@ static void show_queues(struct Scsi_Host *shpnt)
> unsigned long flags;
>
> DO_LOCK(flags);
> - printk(KERN_DEBUG "\nqueue status:\nissue_SC:\n");
> + printk(KERN_DEBUG "\n"
> + KERN_DEBUG "queue status:\n"
> + KERN_DEBUG "issue_SC:\n");
> for (ptr = ISSUE_SC; ptr; ptr = SCNEXT(ptr))
> show_command(ptr);
> DO_UNLOCK(flags);
> @@ -3663,7 +3666,8 @@ static int __init aha152x_init(void)
>
> for (i = 0; i<setup_count; i++) {
> if (!checksetup(&setup[i])) {
> - printk(KERN_ERR "\naha152x: %s\n", setup[i].conf);
> + printk(KERN_ERR "\n"
> + KERN_ERR "aha152x: %s\n", setup[i].conf);
> printk(KERN_ERR "aha152x: invalid line\n");
> }
> }
> @@ -3676,7 +3680,8 @@ static int __init aha152x_init(void)
>
> if (setup_count == 0 || (override.io_port != setup[0].io_port)) {
> if (!checksetup(&override)) {
> - printk(KERN_ERR "\naha152x: invalid override SETUP0={0x%x,%d,%d,%d,%d,%d,%d,%d}\n",
> + printk(KERN_ERR "\n"
> + KERN_ERR "aha152x: invalid override SETUP0={0x%x,%d,%d,%d,%d,%d,%d,%d}\n",
> override.io_port,
> override.irq,
> override.scsiid,
> @@ -3697,7 +3702,8 @@ static int __init aha152x_init(void)
>
> if (setup_count == 0 || (override.io_port != setup[0].io_port)) {
> if (!checksetup(&override)) {
> - printk(KERN_ERR "\naha152x: invalid override SETUP1={0x%x,%d,%d,%d,%d,%d,%d,%d}\n",
> + printk(KERN_ERR "\n"
> + KERN_ERR "aha152x: invalid override SETUP1={0x%x,%d,%d,%d,%d,%d,%d,%d}\n",
> override.io_port,
> override.irq,
> override.scsiid,
> diff --git a/drivers/scsi/dpt_i2o.c b/drivers/scsi/dpt_i2o.c
> index 502732a..b40efe0 100644
> --- a/drivers/scsi/dpt_i2o.c
> +++ b/drivers/scsi/dpt_i2o.c
> @@ -3148,7 +3148,8 @@ static int adpt_i2o_issue_params(int cmd, adpt_hba* pHba, int tid,
> }
>
> if (res[1]&0x00FF0000) { /* BlockStatus != SUCCESS */
> - printk(KERN_WARNING "%s: %s - Error:\n ErrorInfoSize = 0x%02x, "
> + printk(KERN_WARNING "%s: %s - Error:\n"
> + KERN_WARNING " ErrorInfoSize = 0x%02x, "
> "BlockStatus = 0x%02x, BlockSize = 0x%04x\n",
> pHba->name,
> (cmd == I2O_CMD_UTIL_PARAMS_SET) ? "PARAMS_SET"
> diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c
> index cdbcaa5..1afcb6c 100644
> --- a/drivers/scsi/mac_scsi.c
> +++ b/drivers/scsi/mac_scsi.c
> @@ -311,7 +311,8 @@ int macscsi_detect(struct scsi_host_template * tpnt)
> printk (KERN_INFO " %d", instance->irq);
> printk(KERN_INFO " options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
> instance->can_queue, instance->cmd_per_lun, MACSCSI_PUBLIC_RELEASE);
> - printk(KERN_INFO "\nscsi%d:", instance->host_no);
> + printk(KERN_INFO "\n"
> + KERN_INFO "scsi%d:", instance->host_no);
> NCR5380_print_options(instance);
> printk("\n");
> called = 1;
> diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c
> index 3907f67..a3083a6 100644
> --- a/drivers/scsi/megaraid.c
> +++ b/drivers/scsi/megaraid.c
> @@ -2077,7 +2077,8 @@ mega_create_proc_entry(int index, struct proc_dir_entry *parent)
> adapter->controller_proc_dir_entry = proc_mkdir(string, parent);
>
> if(!controller_proc_dir_entry) {
> - printk(KERN_WARNING "\nmegaraid: proc_mkdir failed\n");
> + printk(KERN_WARNING "\n"
> + KERN_WARNING "megaraid: proc_mkdir failed\n");
> return;
> }
> adapter->proc_read = CREATE_READ_PROC("config", proc_read_config);
> diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c
> index ebb948c..fe05e86 100644
> --- a/drivers/scsi/megaraid/megaraid_sas.c
> +++ b/drivers/scsi/megaraid/megaraid_sas.c
> @@ -744,12 +744,14 @@ megasas_dump_pending_frames(struct megasas_instance *instance)
> u32 sgcount;
> u32 max_cmd = instance->max_fw_cmds;
>
> - printk(KERN_ERR "\nmegasas[%d]: Dumping Frame Phys Address of all pending cmds in FW\n",instance->host->host_no);
> + printk(KERN_ERR "\n"
> + KERN_ERR "megasas[%d]: Dumping Frame Phys Address of all pending cmds in FW\n",instance->host->host_no);
> printk(KERN_ERR "megasas[%d]: Total OS Pending cmds : %d\n",instance->host->host_no,atomic_read(&instance->fw_outstanding));
> + printk(KERN_ERR "\n");
> if (IS_DMA64)
> - printk(KERN_ERR "\nmegasas[%d]: 64 bit SGLs were sent to FW\n",instance->host->host_no);
> + printk(KERN_ERR "megasas[%d]: 64 bit SGLs were sent to FW\n",instance->host->host_no);
> else
> - printk(KERN_ERR "\nmegasas[%d]: 32 bit SGLs were sent to FW\n",instance->host->host_no);
> + printk(KERN_ERR "megasas[%d]: 32 bit SGLs were sent to FW\n",instance->host->host_no);
>
> printk(KERN_ERR "megasas[%d]: Pending OS cmds in FW : \n",instance->host->host_no);
> for (i = 0; i < max_cmd; i++) {
> @@ -770,25 +772,30 @@ megasas_dump_pending_frames(struct megasas_instance *instance)
> printk(KERN_ERR "megasas[%d]: frame count : 0x%x, Cmd : 0x%x, Tgt id : 0x%x, lun : 0x%x, cdb_len : 0x%x, data xfer len : 0x%x, sense_buf addr : 0x%x,sge count : 0x%x\n",instance->host->host_no,cmd->frame_count,pthru->cmd,pthru->target_id,pthru->lun,pthru->cdb_len , pthru->data_xfer_len,pthru->sense_buf_phys_addr_lo,sgcount);
> }
> if(megasas_dbg_lvl & MEGASAS_DBG_LVL){
> + printk(KERN_ERR "megasas:");
> for (n = 0; n < sgcount; n++){
> if (IS_DMA64)
> - printk(KERN_ERR "megasas: sgl len : 0x%x, sgl addr : 0x%08lx ",mfi_sgl->sge64[n].length , (unsigned long)mfi_sgl->sge64[n].phys_addr) ;
> + printk(" sgl len : 0x%x, sgl addr : 0x%08lx",mfi_sgl->sge64[n].length , (unsigned long)mfi_sgl->sge64[n].phys_addr) ;
> else
> - printk(KERN_ERR "megasas: sgl len : 0x%x, sgl addr : 0x%x ",mfi_sgl->sge32[n].length , mfi_sgl->sge32[n].phys_addr) ;
> + printk(" sgl len : 0x%x, sgl addr : 0x%x",mfi_sgl->sge32[n].length , mfi_sgl->sge32[n].phys_addr) ;
> }
> }
> - printk(KERN_ERR "\n");
> + printk("\n");
> } /*for max_cmd*/
> - printk(KERN_ERR "\nmegasas[%d]: Pending Internal cmds in FW : \n",instance->host->host_no);
> + printk(KERN_ERR "\n"
> + KERN_ERR "megasas[%d]: Pending Internal cmds in FW : \n",instance->host->host_no);
> + printk(KERN_ERR);
> for (i = 0; i < max_cmd; i++) {
>
> cmd = instance->cmd_list[i];
>
> if(cmd->sync_cmd == 1){
> - printk(KERN_ERR "0x%08lx : ", (unsigned long)cmd->frame_phys_addr);
> + printk("0x%08lx : ", (unsigned long)cmd->frame_phys_addr);
> }
> }
> - printk(KERN_ERR "megasas[%d]: Dumping Done.\n\n",instance->host->host_no);
> + printk("\n");
> + printk(KERN_ERR "megasas[%d]: Dumping Done.\n"
> + KERN_ERR "\n",instance->host->host_no);
> }
>
> /**
> diff --git a/drivers/scsi/osst.c b/drivers/scsi/osst.c
> index 08060fb..43bc5d8 100644
> --- a/drivers/scsi/osst.c
> +++ b/drivers/scsi/osst.c
> @@ -5936,7 +5936,8 @@ static int __init init_osst(void)
> {
> int err;
>
> - printk(KERN_INFO "osst :I: Tape driver with OnStream support version %s\nosst :I: %s\n", osst_version, cvsid);
> + printk(KERN_INFO "osst :I: Tape driver with OnStream support version %s\n"
> + KERN_INFO "osst :I: %s\n", osst_version, cvsid);
>
> validate_options();
>
> diff --git a/drivers/scsi/zalon.c b/drivers/scsi/zalon.c
> index 4b5f908..24f0b9e 100644
> --- a/drivers/scsi/zalon.c
> +++ b/drivers/scsi/zalon.c
> @@ -137,7 +137,7 @@ zalon_probe(struct parisc_device *dev)
> goto fail;
>
> if (request_irq(dev->irq, ncr53c8xx_intr, IRQF_SHARED, "zalon", host)) {
> - printk(KERN_ERR "%s: irq problem with %d, detaching\n ",
> + printk(KERN_ERR "%s: irq problem with %d, detaching\n",
> dev->dev.bus_id, dev->irq);
> goto fail;
> }
> diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/savage/savagefb_driver.c
> index b855f4a..b60c32b 100644
> --- a/drivers/video/savage/savagefb_driver.c
> +++ b/drivers/video/savage/savagefb_driver.c
> @@ -515,27 +515,30 @@ static void SavagePrintRegs(struct savagefb_par *par)
> int vgaCRIndex = 0x3d4;
> int vgaCRReg = 0x3d5;
>
> - printk(KERN_DEBUG "SR x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE "
> - "xF");
> + printk(KERN_DEBUG
> + "SR x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF");
>
> for (i = 0; i < 0x70; i++) {
> if (!(i % 16))
> - printk(KERN_DEBUG "\nSR%xx ", i >> 4);
> + printk("\n" KERN_DEBUG "SR%xx ", i >> 4);
> vga_out8(0x3c4, i, par);
> - printk(KERN_DEBUG " %02x", vga_in8(0x3c5, par));
> + printk(" %02x", vga_in8(0x3c5, par));
> }
>
> - printk(KERN_DEBUG "\n\nCR x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC "
> - "xD xE xF");
> + printk("\n"
> + KERN_DEBUG "\n"
> + KERN_DEBUG
> + "CR x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE xF");
>
> for (i = 0; i < 0xB7; i++) {
> if (!(i % 16))
> - printk(KERN_DEBUG "\nCR%xx ", i >> 4);
> + printk("\n" KERN_DEBUG "CR%xx ", i >> 4);
> vga_out8(vgaCRIndex, i, par);
> - printk(KERN_DEBUG " %02x", vga_in8(vgaCRReg, par));
> + printk(" %02x", vga_in8(vgaCRReg, par));
> }
>
> - printk(KERN_DEBUG "\n\n");
> + printk("\n"
> + KERN_DEBUG "\n");
> }
> #endif
>
> diff --git a/fs/dlm/dlm_internal.h b/fs/dlm/dlm_internal.h
> index 74901e9..59f3cb4 100644
> --- a/fs/dlm/dlm_internal.h
> +++ b/fs/dlm/dlm_internal.h
> @@ -81,10 +81,11 @@ do { \
> { \
> if (!(x)) \
> { \
> - printk(KERN_ERR "\nDLM: Assertion failed on line %d of file %s\n" \
> - "DLM: assertion: \"%s\"\n" \
> - "DLM: time = %lu\n", \
> - __LINE__, __FILE__, #x, jiffies); \
> + printk(KERN_ERR "\n" \
> + KERN_ERR "DLM: Assertion failed on line %d of file %s\n" \
> + KERN_ERR "DLM: assertion: \"%s\"\n" \
> + KERN_ERR "DLM: time = %lu\n", \
> + __LINE__, __FILE__, #x, jiffies); \
> {do} \
> printk("\n"); \
> BUG(); \
> diff --git a/fs/freevxfs/vxfs_bmap.c b/fs/freevxfs/vxfs_bmap.c
> index f86fd3c..c65b39a 100644
> --- a/fs/freevxfs/vxfs_bmap.c
> +++ b/fs/freevxfs/vxfs_bmap.c
> @@ -166,7 +166,9 @@ vxfs_bmap_indir(struct inode *ip, long indir, int size, long block)
> struct vxfs_typed_dev4 *typ4 =
> (struct vxfs_typed_dev4 *)typ;
>
> - printk(KERN_INFO "\n\nTYPED_DEV4 detected!\n");
> + printk(KERN_INFO "\n"
> + KERN_INFO "\n"
> + KERN_INFO "TYPED_DEV4 detected!\n");
> printk(KERN_INFO "block: %Lu\tsize: %Ld\tdev: %d\n",
> (unsigned long long) typ4->vd4_block,
> (unsigned long long) typ4->vd4_size,
> @@ -229,7 +231,9 @@ vxfs_bmap_typed(struct inode *ip, long iblock)
> struct vxfs_typed_dev4 *typ4 =
> (struct vxfs_typed_dev4 *)typ;
>
> - printk(KERN_INFO "\n\nTYPED_DEV4 detected!\n");
> + printk(KERN_INFO "\n"
> + KERN_INFO "\n"
> + KERN_INFO "TYPED_DEV4 detected!\n");
> printk(KERN_INFO "block: %Lu\tsize: %Ld\tdev: %d\n",
> (unsigned long long) typ4->vd4_block,
> (unsigned long long) typ4->vd4_size,
> diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c
> index 91d1d0f..3c51cda 100644
> --- a/fs/jffs2/wbuf.c
> +++ b/fs/jffs2/wbuf.c
> @@ -1094,7 +1094,8 @@ int jffs2_write_nand_badblock(struct jffs2_sb_info *c, struct jffs2_eraseblock *
> if (!c->mtd->block_markbad)
> return 1; // What else can we do?
>
> - printk(KERN_WARNING "JFFS2: marking eraseblock at %08x\n as bad", bad_offset);
> + printk(KERN_WARNING "JFFS2: marking eraseblock at %08x\n"
> + KERN_WARNING " as bad", bad_offset);
> ret = c->mtd->block_markbad(c->mtd, bad_offset);
>
> if (ret) {
> diff --git a/mm/slub.c b/mm/slub.c
> index 6c6d74f..a824098 100644
> --- a/mm/slub.c
> +++ b/mm/slub.c
> @@ -2881,7 +2881,8 @@ static void resiliency_test(void)
>
> p = kzalloc(16, GFP_KERNEL);
> p[16] = 0x12;
> - printk(KERN_ERR "\n1. kmalloc-16: Clobber Redzone/next pointer"
> + printk(KERN_ERR "\n"
> + KERN_ERR "1. kmalloc-16: Clobber Redzone/next pointer"
> " 0x12->0x%p\n\n", p + 16);
>
> validate_slab_cache(kmalloc_caches + 4);
> @@ -2889,7 +2890,8 @@ static void resiliency_test(void)
> /* Hmmm... The next two are dangerous */
> p = kzalloc(32, GFP_KERNEL);
> p[32 + sizeof(void *)] = 0x34;
> - printk(KERN_ERR "\n2. kmalloc-32: Clobber next pointer/next slab"
> + printk(KERN_ERR "\n"
> + KERN_ERR "2. kmalloc-32: Clobber next pointer/next slab"
> " 0x34 -> -0x%p\n", p);
> printk(KERN_ERR "If allocated object is overwritten then not detectable\n\n");
>
> @@ -2897,12 +2899,14 @@ static void resiliency_test(void)
> p = kzalloc(64, GFP_KERNEL);
> p += 64 + (get_cycles() & 0xff) * sizeof(void *);
> *p = 0x56;
> - printk(KERN_ERR "\n3. kmalloc-64: corrupting random byte 0x56->0x%p\n",
> + printk(KERN_ERR "\n"
> + KERN_ERR "3. kmalloc-64: corrupting random byte 0x56->0x%p\n",
> p);
> printk(KERN_ERR "If allocated object is overwritten then not detectable\n\n");
> validate_slab_cache(kmalloc_caches + 6);
>
> - printk(KERN_ERR "\nB. Corruption after free\n");
> + printk(KERN_ERR "\n"
> + KERN_ERR "B. Corruption after free\n");
> p = kzalloc(128, GFP_KERNEL);
> kfree(p);
> *p = 0x78;
> @@ -2912,13 +2916,15 @@ static void resiliency_test(void)
> p = kzalloc(256, GFP_KERNEL);
> kfree(p);
> p[50] = 0x9a;
> - printk(KERN_ERR "\n2. kmalloc-256: Clobber 50th byte 0x9a->0x%p\n\n", p);
> + printk(KERN_ERR "\n"
> + KERN_ERR "2. kmalloc-256: Clobber 50th byte 0x9a->0x%p\n\n", p);
> validate_slab_cache(kmalloc_caches + 8);
>
> p = kzalloc(512, GFP_KERNEL);
> kfree(p);
> p[512] = 0xab;
> - printk(KERN_ERR "\n3. kmalloc-512: Clobber redzone 0xab->0x%p\n\n", p);
> + printk(KERN_ERR "\n"
> + KERN_ERR "3. kmalloc-512: Clobber redzone 0xab->0x%p\n\n", p);
> validate_slab_cache(kmalloc_caches + 9);
> }
> #else
>
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/