Re: v2.6.23-rc2 locks up during boot (without acpi=off)

[Andrew Morton]

On Sat, 11 Aug 2007 15:39:30 +0300 (EEST) "Ilpo Järvinen" <ilpo.jarvinen@xxxxxxxxxxx> wrote:

> I noticed that v2.6.23-rc1 locks up during boot, same thing happens now 
> with the latest linus' tree (+net-2.6.24 and tcp-2.6 tree stuff on top 
> of it; in -rc1 test they weren't though). The exact location of hang
> varies a bit though. No OOPS, does not respond to sysrq or anything else 
> besides reset. Last known bootable one is something like 2.6.22-rc4 
> (I usually run 2.6.21.5 on this machine, haven't tried any 2.6.22 on
> this after those rcs). Problem seems to start after this line:
> 
> Time: acpi_pm clocksource has been installed.
> 
> ...the power led starts blinking (not periodic cycle but more or less 
> varying on-off cycle, never seen that led blink before at all, didn't know 
> that one can make it blink :-)) and the machine gets consideably slower 
> too. Never have it been able to complete booting all they way up to login 
> prompt before lock up.
> 
> Tried with acpi=off, boots just fine (dmesg comes from it). I can take 

A hang a short-but-variable period after a clocksource was installed: probably
means that the kernel wedged on the first clock interrupt.

I'd expect 2.6.22 to work OK.  It's a little unexpected that the bug was added
after 2.6.22: a number of these reports have narrowed down to the patchset which
added dynticks and clockevents, but that was already in 2.6.22.

It'd be great if you could run a git bisection search please.
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/