Re: sata drive loosing connection/resetting port

[Tejun Heo]

Andreas Radke wrote:
[on ahci]
> Aug 13 18:00:33 workstation64 ata1.00: exception Emask 0x10 SAct 0x0 SErr 0x400101 action 0x2 frozen
> Aug 13 18:00:33 workstation64 ata1.00: (irq_stat 0x08000000, interface fatal error)
> Aug 13 18:00:33 workstation64 ata1.00: cmd ca/00:08:a0:cb:07/00:00:00:00:00/e8 tag 0 cdb 0x0 data 4096 out
> Aug 13 18:00:33 workstation64 res 50/00:00:bf:32:07/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)

Errors are very consistent.  Data transfer from the host to the drive
fails and SError indicates Handshake Error, Non-recovered transient data
integrity error and often Recovered Data integrity error.  For some
reason, your drive doesn't like what it's hearing from the controller
and replies with R_ERR.

[on ata_piix]
> Aug 14 23:06:01 workstation64 ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2
> Aug 14 23:06:01 workstation64 ata1.00: (BMDMA stat 0x26)
> Aug 14 23:06:01 workstation64 ata1.00: cmd ca/00:08:91:0d:45/00:00:00:00:00/e4 tag 0 cdb 0x0 data 4096 out
> Aug 14 23:06:01 workstation64 res 51/84:08:91:0d:45/00:00:00:00:00/e4 Emask 0x30 (host bus error)

As error reporting when using ata_piix is very limited.  It gets
reported as host bus error but I think it's basically the same problem.

I don't think this is driver issue.  I have the same controller and I've
never seen similar thing happening and I have plenty of drives and test
them often.  Error reports also point to transmission problems.  Your
drive just doesn't like what it's hearing.  Does 'smartctl -a /dev/sda'
tell anything special?

-- 
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/