Re: nanosleep() accuracy

[GolovaSteek]

2007/8/17, Michal Schmidt <xschmi00@xxxxxxxxxxxxxxxxxx>:
> GolovaSteek skrev:
> > Hello!
> > I need use sleep with accurat timing.
> > I use 2.6.21 with rt-prempt patch.
> > with enabled rt_preempt, dyn_ticks, and local_apic
> > But
> >
> > req.tv_nsec = 300000;
> > req.tv_sec = 0;
> > nanosleep(&req,NULL)
> >
> > make pause around 310-330 microseconds.
>
> How do you measure this?
> If you want to have something done every 300 microseconds, you must not
> sleep for 300 microseconds in each iteration, because you'd accumulate
> errors. Use a periodic timer or use the current time to compute how long
> to sleep in each iteration. Take a look how cyclictest does it.

no. I just want my programm go to sleep sometimes and wake up in correct time.

> > I tried to understend how work nanosleep(), but it not depends from
> > jiffies and from smp_apic_timer_interrupt.
> >
> > When can accuracy be lost?
> > And how are process waked up?
> >
> >
> > GolovaSteek
>
> Don't forget the process will always have non-zero wakeup latency. It
> takes some time to process an interrupt, wakeup the process and schedule
> it to run on the CPU. 10-30 microseconds is not unreasonable.

But 20000 operations can be done in 10 microseconds?
and why is there that inconstancy? Why sametimes 10 and sometimes 30?
In which points of implementation it happens?

GolovaSteek
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/