On 8/18/07, Jan Engelhardt <jengelh@xxxxxxxxxxxxxxx> wrote:On Aug 18 2007 12:08, Marty Leisner wrote:In embedded system design, it may be useful to poweroff the disks (as opposedThat means you also have to power it on...
to merely spinning them down). We want to leave the system running while
the disk is powered down, and let the disk powerup when it needs to be
spun up.
While the "power off mechanism" would be platform dependent, is there aI do not see why that would be needed from a software point of view. Just make
generic path to announce "prepare for power going away"?
sure that the disk does not needlessy emergency-park when pulling power. When
someone wants to write to disk, the request goes to the device driver, which
hands it to the controller, which hands it to the disk. And your controller
should be able to handle it (e.g. wait until reconnect) when there is a request
for a disk that is powered off.
Jan
--
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
I see this a a very important feature in the embedded system relm, I
have worked on two projects that required extreme power management,
and massive data storage. The ability to fully turn off a drive while
the system is running is key. It seems like this should be able to be
done from a kernel point of view rather than extra hardware. Although
if is not in the IDE/SATA spec then extra hardware would be necessary.